You are not logged in Total: 7journals, 20,272articles Online
AccountAccount
Login / Register
Forgot Login?
 
Main menuMain menu
What's new
Journal list
Visiting ranking
Phrase ranking
Polls
About us
 
SearchSearch
 
Journal Site
Advanced Search
 

Home  >  Journal list  >  MATERIALS TRANSACTIONS  >  Vol.56  No.2 (2015)  >  pp.236-241

MATERIALS TRANSACTIONS
<<Previous article Vol.56  No.2 (2015)   pp.236 - 241 Next article>>

Influence of Pre-Deformation of 5052H112 Alloy on Tensile Properties and Fracture Resistance under Vibration

Kuo-Tsung Huang1), Shih-Hsien Chang2), Truan-Sheng Lui3)
1) Department of Auto-Mechanics, National Kangshan Agricultural Industrial Senior High School 2) Department of Materials and Mineral Resources Engineering, National Taipei University of Technology 3) Department of Materials Science and Engineering, National Cheng Kung University

This study prepared a 5052H112 alloy under different cold-rolled reductions to explore its microstructure and mechanical properties. The experimental results indicated that the cold-rolled specimens had good tensile properties and better vibration fracture resistance, due to the high densities of dislocation and small aspect ratio of crystal grain. The stress-elongation curves of all specimens showed the serrated yielding. The high densities of dislocation and small aspect ratio of crystal grain introduced by cold-rolling could hold the mobile dislocations long enough to let Mg atoms form atmospheres around them. In addition, the crack propagation behavior of all specimens showed that slip bands can be observed in the vicinity of the main crack and be suppressed by increasing the cold-rolled reduction. Crack propagation showed that rolled specimens exhibit decreasing crack propagation rates with increased matrix strengthening (cold-rolling). Therefore, it can be concluded that a large number of dislocation tangles introduced by cold-rolling are effective in improving mechanical properties.


Keyword:
cold-rolling, serrated yielding, dislocation tangles, fracture resistance

Received: August 22, 2014
Accepted: October 27, 2014 , Published online: January 25, 2015

PDFPDF file (J-STAGE)J-STAGEJ-STAGE


SPARC Japan

Terms of Use | Privacy Policy