You are not logged in Total: 7journals, 19,598articles Online
AccountAccount
Login / Register
Forgot Login?
 
Main menuMain menu
What's new
Journal list
Visiting ranking
Phrase ranking
Polls
About us
 
SearchSearch
 
Journal Site
Advanced Search
 

Home  >  Journal list  >  MATERIALS TRANSACTIONS  >  Vol.45 No.11 (2004)

MATERIALS TRANSACTIONS
<<Previous issue Vol.45 No.11 (2004) Next issue>>

General Rule of Phase Decomposition in Zn-Al Based Alloys (II)
—On Effects of External Stresses on Phase Transformation—
( pp.3083 - 3097 )
Yao hua Zhu1)

 
Giant Magnetoimpedance in Ti/CoP Plated Wires
( pp.3098 - 3101 )
Jifan Hu1), Hongwei Qin1), Ling Zhang1), Zhuo Wang1) and Minhua Jiang1)

 
Electrical Transport and Thermoelectric Properties of PbTe Prepared by HPHT
( pp.3102 - 3105 )
Pinwen Zhu1)2), Yoshio Imai1), Yukihiro Isoda1), Yoshikazi Shinohara3), Xiaopeng Jia2), Guozhong Ren2) and Guangtian Zou2)

 
Precipitation in an Al-300 ppm Fe Alloy
( pp.3106 - 3113 )
Atsushi Yamamoto1), Takeshi Kato1) and Harushige Tsubakino1)

 
Grain Size Measurements in Mg-Al High Pressure Die Castings Using Electron Back-Scattered Diffraction (EBSD)
( pp.3114 - 3119 )
Amanda Bowles1)2), Kazuhiro Nogita2), Matthew Dargusch1)2), Cameron Davidson1)3) and John Griffiths1)3)

 
Crystalline Texture and Magnetostriction in Rapid-Solidified Fe-Pd Alloy Ribbons
( pp.3120 - 3123 )
Takamasa Onoki1), Shin-ichi Yamaura2), Yasubumi Furuya3), Hisamichi Kimura2), Takashi Matsuzaki1) and Tadao Watanabe1)

 
A Novel Process to Fabricate of Highly Textured Ceramics in a High Magnetic Field
( pp.3124 - 3129 )
Shuqin Li1), Kensuke Sassa1), Kazuhiko Iwai1) and Shigeo Asai1)

 
Mechanism of Anomalous Type Electrodeposition of Fe-Ni Alloys from Sulfate Solutions
( pp.3130 - 3135 )
Hiroaki Nakano1), Masayuki Matsuno2), Satoshi Oue1), Masaaki Yano3), Shigeo Kobayashi2) and Hisaaki Fukushima1)

 
Detection of Damage and Fracture of Forging Die by Fractal Property of Acoustic Emission
( pp.3136 - 3141 )
Kunio Hayakawa1), Tamotsu Nakamura1), Hideki Yonezawa2) and Shigekazu Tanaka2)

 
Basal-Texture Induced Low Formability during Room Temperature Hydroforming of Fine-Grained AZ31 Mg Tubes
( pp.3142 - 3149 )
C.C. Huang1), J.C. Huang1), Y.K. Lin2) and Y.M. Hwang2)

 
Effect of Drying Temperature on the Characteristics of the Lead Zirconium Titanate Powders Prepared by Sol-Gel Process
( pp.3150 - 3155 )
Tien-I Chang1), Jow-Lay Huang1), Jen-Fu Lin1), Bing-Huei Chen2), Long Wu2), Hong-Ping Lin3) and Horng-Hwa Lu4)

 
Fabrication of Titanium Nitride/Apatite Functionally Graded Implants by Spark Plasma Sintering
( pp.3156 - 3162 )
Hideomi Kondo1), Atsuro Yokoyama1), Mamoru Omori3), Akira Ohkubo3), Toshio Hirai4), Fumio Watari2), Motohiro Uo2) and Takao Kawasaki1)

 
Fabrication of Copper Matrix Composites and Simultaneous Bonding with Aluminum Alloy Using Combustion Reaction of Cu-Ti-B System
( pp.3163 - 3171 )
Yong-Jai Kwon1), Makoto Kobashi1) and Naoyuki Kanetake1)

 
Effect of Organic Additives on Formation and Growth Behavior of Micro-Void in Electroplating Copper Films
( pp.3172 - 3176 )
Miki Moriyama1), Shinya Konishi1), Susumu Tsukimoto1) and Masanori Murakami1)

 
Catalytic Properties of Ni3Al Intermetallics for Methanol Decomposition
( pp.3177 - 3179 )
Ya Xu1), Satoshi Kameoka2), Kyosuke Kishida1), Masahiko Demura1), An-pang Tsai1)2) and Toshiyuki Hirano1)

 
Electrical and Optical Properties of Germanium-Doped Zinc Oxide Thin Films
( pp.3180 - 3183 )
Makoto Arita1), Mayu Yamaguchi1) and Masataka Masuda1)

 
Material Flow Accounting for Metals in Japan
( pp.3184 - 3193 )
Shinsuke Murakami1), Megumi Yamanoi2), Tsuyoshi Adachi2), Gento Mogi2) and Jiro Yamatomi2)

 
Life Cycle Impact Assessment of Lead-free Solder Considering the Trade-off Relationship between Toxic Impact and Other Impact Categories
( pp.3194 - 3200 )
Norihiro Itsubo1), Jaesung Noh1) and Atsushi Inaba1)

 
Effects of Thickness of Electroless Ni-P Deposit on Corrosion Fatigue Damage of 7075-T6 under Salt Spray Atmosphere
( pp.3201 - 3208 )
Cheng-Hsun Hsu1), Sheng-Chien Chiu1) and Yih-Hsun Shih2)

 
Development of 3Y-PSZ/AISI 316L Composites for Joint Prostheses
( pp.3209 - 3215 )
Kazuhiro Yoshida1), Hiroshi Mishina2), Shinya Sasaki3), Masafumi Morita4) and Kiyoshi Mabuchi5)

 
Effect of Microstructural Feature on the Deterioration of Tensile Properties and Vibration Fracture Resistance of FSW 5052-H34 Alloy
( pp.3216 - 3222 )
Kuo-Tsung Huang1), Truan-Sheng Lui1) and Li-Hui Chen1)

 
New Ti-Based Bulk Glassy Alloys with High Glass-Forming Ability and Superior Mechanical Properties
( pp.3223 - 3227 )
Chaoli Ma1), Hideki Soejima1), Satoru Ishihara1), Kenji Amiya1), Nobuyuki Nishiyama1) and Akihisa Inoue2)

 
Enhancements of Magnetocaloric Effects in La(Fe0.90Si0.10)13 and Its Hydride by Partial Substitution of Ce for La
( pp.3228 - 3231 )
Shun Fujieda1), Asaya Fujita1) and Kazuaki Fukamichi1)

 
X-ray Diffraction Study for Mg4Pd Crystalline and Amorphous Alloys Using Synchrotron Radiation
( pp.3232 - 3234 )
Sumiaki Nakano1), Shin-ichi Yamaura2), Akiko Kitano3), Masugu Sato3), Sakae Uchinashi1), Tadashi Hamada1), Norimasa Umesaki3), Hisamichi Kimura2) and Akihisa Inoue2)

 


SPARC Japan

Terms of Use | Privacy Policy