You are not logged in Total: 7journals, 20,687articles Online
AccountAccount
Login / Register
Forgot Login?
 
Main menuMain menu
What's new
Journal list
Visiting ranking
Phrase ranking
Polls
About us
 
SearchSearch
 
Journal Site
Advanced Search
 

Home  >  Journal list  >  Journal of the Ceramic Society of Japan  >  Vol.116  No.1349 (January) (2008)  >  pp.130-136

Journal of the Ceramic Society of Japan
<<Previous article Vol.116  No.1349 (January) (2008)   pp.130 - 136 Next article>>

Low pressure sintering of sialon using different sintering additives

H. J. JUNG1), K. Y. AHN1), S. C. CHOI1), S. H. LEE2) and F. ALDINGER2)
1) Ceramic Processing Research Center, Hanyang University
2) Max-Planck-Institut fur Metallforschung and Institut fur Nichtmetallische Anorganische Materialien, Universität Stuttgart, Pulvermetallurgisches Laboratorium


  The sintering behavior and the mechanical and oxidation properties of Sialon were investigated by varying the composition, amount, and cationic radii of sintering additives composed of AlN-Er2O3-M2O3 (M=Y or Sc). The optimum additive composition for the pressureless sintering of Sialon was determined to be (0.6 AlN:0.4 [0.3 Er2O3:0.7 M2O3]) and the optimum content was 10-15 mass%. The maximum relative densities of Sialon using AlN-Er2O3-Y2O3 and AlN-Er2O3-Sc2O3 additives (termed SAEY and SAES) were 94.4 and 97.9% at 0.1 MPa N2, respectively. The pressureless sintered SAES sample showed fairly high strength (506 MPa) using the optimized additive composition. In both systems, the oxidation resistance was improved by decreasing the total amount of sintering additives.



Keyword:
Sialon, Pressureless sintering, Rare-earth oxides, Strength, Oxidation

Received: August 27, 2007
Accepted: November 15, 2007 , Published online: January 01, 2008
Copyright (c) 2008 The Ceramic Society of Japan

PDFPDF file (J-STAGE)J-STAGEJ-STAGE


SPARC Japan

Terms of Use | Privacy Policy