Influence of Irreversible Hydrogen on the Fatigue Crack Initiation Life in Cold Drawn High Strength Steel
|
(
pp.1077 - 1083 )
|
Masanori NAKATANI1), Takashi KATO1), Masayuki SAKIHARA2) and Kohji MINOSHIMA2)
|
|
Effect of Sensitization Treatment on Hydrogen Embrittlement Cracking of Duplex Stainless Steel
|
(
pp.1084 - 1090 )
|
Keisuke KUROSE1), Hideo CHO2), Takeshi OGAWA2) and Mikio TAKEMOTO3)
|
|
Susceptibility to Stress Corrosion Cracking of AZ31B Magnesium Alloy by Slow Strain-Rate Technique
|
(
pp.1091 - 1096 )
|
Hitoshi UCHIDA1), Masato YAMASHITA1), Satoshi HANAKI1) and Takahiko NOZAKI2)
|
|
Extreme-Value Distribution of the Metastable-Pit Depth Estimated by Potential Noise Method
|
(
pp.1097 - 1100 )
|
Hiroyuki INOUE1), Riki MORIYA2) and Rokuro NISHIMURA1)
|
|
Classification of Corrosion-AEs Form Noises for Corrosion Inspection of Oil Storage Tank Floor Plate
|
(
pp.1101 - 1107 )
|
Hideo CHO1), Akio YONEZU2), Hiroaki SUZUKI3) and Mikio TAKEMOTO4)
|
|
The Effect of Aluminium Oxide on Crevice Corrosion Resistance of Carbon Steel in Concentrated Lithium Bromide Solutions
|
(
pp.1108 - 1113 )
|
Atsushi NONAKA1), Hidefumi YAMANAKA1) and Hidemasa NONAKA1)
|
|
Estimation of Emission Characteristics of Sulfur Gas from Rubber
|
(
pp.1114 - 1120 )
|
Rintaro MINAMITANI1)
|
|
Crack-Healing Behavior of Si3N4/SiC Composite under Low Oxygen Partial Pressure
|
(
pp.1132 - 1137 )
|
Young-Soon JUNG1), Wataru NAKAO2), Koji TAKAHASHI3), Kotoji ANDO3) and Shinji SAITO4)
|
|
Initiation Strength Properties of Ring Crack Caused by Sphere Indentation in Damage-Tolerant Advanced Pore-Free SiC
|
(
pp.1138 - 1145 )
|
Shinya MATSUDA1), Manabu TAKAHASHI1), Masafumi MATSUSHITA1), Nagatoshi OKABE2) and Hiroaki OHFUJI3)
|
|
The Influence of Slack Quenching Structures on Internal Fatigue Fracture of a Shot Peened Spring Steel
|
(
pp.1146 - 1152 )
|
Maya SUGIMOTO1), Kenji KANAZAWA2) and Akira TANGE3)
|
|
Theoretical and Experimental Study of Warp Deformation Behavior with Chemical Reaction and Thermal Load for Viscoelastic Laminated Body
|
(
pp.1153 - 1159 )
|
Shozo NAKAMURA1), Takaaki TANAKA2) and Tsukasa SHINOHARA2)
|
|
Damage Condition of GFRP Tank Used for Long Term in Acid Environment and Damage Inspection Based on Ultrasonic Echo Measurement
|
(
pp.1160 - 1166 )
|
Shinta MABUCHI1), Tatsuro MORITA1), Yoshimichi FUJII1) and Miki HIRANO1)
|
|
Experimental Study on Evaluation and Control of Ultraviolet Resistance of Sand Stabilized with Organic Slurry Containing Hydrophilic Polyurethane
|
(
pp.1167 - 1172 )
|
Zhiren WU1), Kentaro IWASHITA2), Zhishen WU3) and Hirondo INAGAKI1)
|
|
Comparative Study of Effect of Porosity on Tensile and Shear Ductility in A356 Cast Aluminum Alloy by Finite Element Simulation
|
(
pp.1173 - 1178 )
|
Hiroyuki MAE1)
|
|
Account
Main menu
Search
