Relationship between Deformation and Recrystallization in Σ3 Isoaxial Aluminum Bicrystal Deformed in Tension along the <011> Axis
|
(
pp.381 - 384 )
|
Keizo Kashihara1), Minoru Tagami2), Hiroshi Tanaka1), Tatsuya Okada2) and Fukuji Inoko2)
|
|
Characterization of the Strain-amplitude and Frequency Dependent Damping Capacity in the M2052 Alloy
|
(
pp.385 - 388 )
|
Fuxing Yin1), Yoshiaki Ohsawa1), Akira Sato1) and Kohji Kawahara1)
|
|
Small Specimen Test Technology for Evaluation of Fatigue Properties of Fusion Structural Materials
|
(
pp.389 - 392 )
|
Takanori Hirose1), Hiroyasu Tanigawa2), Masami Ando2), Akira Kohyama1), Yutai Katoh1) and Shiro Jitsukawa2)
|
|
Eutectic Growth Mode in Strontium, Antimony and Phosphorus Modified Hypoeutectic Al-Si Foundry Alloys
|
(
pp.393 - 396 )
|
Kazuhiro Nogita1) and Arne Kristian Dahle1)
|
|
C and Si Impurity Atoms on a GaAs(001) Surface
|
(
pp.397 - 398 )
|
Akitaka Sawamura1), Hideki Yao2) and Mikio Kaji1)
|
|
Observation of Hydrogen Distribution in V35Cr40Ti25 Alloy by Tritium Radioluminography
|
(
pp.399 - 402 )
|
Hideyuki Saitoh1), Hirofumi Homma1), Toshihei Misawa1) and Toshiyuki Ohnishi2)
|
|
Oxidation Mechanism of Ultra Thin TiN Films Prepared by an Advanced Ion-plating Method
|
(
pp.403 - 406 )
|
Kazuo Uetani1), Hiroshi Kajiyama2)3), Akiko Takagi, Isao Tokomoto1), Yasuhiro Koizumi1), Koichi Nose1), Yasushi Ihara1), Akira Kato2), Ken-ichi Onisawa2) and Tetsuroh Minemura2)
|
|
Interfacial Segregation of Early Transition Metals in Nickel Aluminide
|
(
pp.407 - 410 )
|
Hai-Ping Wang1), Marcel Sluiter1) and Yoshiyuki Kawazoe1)
|
|
Ion-Plating Deposition of MgO Thin Films
|
(
pp.411 - 413 )
|
Kazuo Uetani1), Hiroshi Kajiyama2)3), Akira Kato2), Akiko Takagi, Isao Tokomoto1), Yasuhiro Koizumi1), Koichi Nose1), Yasushi Ihara1), Ken-ichi Onisawa2) and Tetsuroh Minemura2)
|
|
Forging Characteristics of AZ31 Mg Alloy
|
(
pp.414 - 417 )
|
Yasumasa Chino1), Mamoru Mabuchi1), Koji Shimojima1), Yasuo Yamada1), Cui’e Wen1), Kenji Miwa1), Mamoru Nakamura1), Tadashi Asahina1), Kenji Higashi2) and Tatsuhiko Aizawa3)
|
|
Effects of Grain Size and Temperature on Environmental Embrittlement of Ni3(Si, Ti) Alloy
|
(
pp.418 - 421 )
|
Yasuyuki Kaneno1), Masamune Wada1), Hirofumi Inoue1) and Takayuki Takasugi1)
|
|
Calculation of Short-Range-Order Diffuse Intensity for a Two Dimensional Square Lattice within Cluster Variation Method
|
(
pp.422 - 424 )
|
Hideyuki Uzawa1) and Tetsuo Mohri1)
|
|
Molecular Dynamics Simulation of Temperature Dependence of Dislocation Behavior in fcc Ni Single Crystal under Tensile Condition
|
(
pp.425 - 428 )
|
Tomoyasu Aihara1), Ryota Kaneko2), Marcel Henricus Franciscus Sluiter2) and Yoshiyuki Kawazoe2)
|
|
Strain Dependence of Solute Atom Energy in Aluminum-Rich Alloys
|
(
pp.429 - 431 )
|
Sornthep Vannarat1)2), Marcel Henricus Franciscus Sluiter1) and Yoshiyuki Kawazoe1)
|
|
All-Electron Mixed-Basis Calculation to Optimize Structures of Vanadium Clusters
|
(
pp.432 - 434 )
|
Young-Cho Bae1), Hiroki Osanai2), Kaoru Ohno3), Marcel Sluiter1) and Yoshiyuki Kawazoe1)
|
|
Evaluation of Microplastic Flow Stress in Copper Alloys from Amplitude-Dependent Internal Friction
|
(
pp.435 - 438 )
|
Naoki Ide1), Kei Hayakawa1) and Shigeru Asano1)
|
|
A Monte Carlo Simulation on the Process of Cluster Deposition
|
(
pp.439 - 442 )
|
Kenta Hongo1), Hiroshi Mizuseki1) and Yoshiyuki Kawazoe1)
|
|
High-Pressure Synthesis of Hydrides of Ca-TM Systems (TM=Mn, Fe, Co and Ni)
|
(
pp.443 - 445 )
|
Hirofumi Kakuta1), Takanobu Miyashita1), Yasuyuki Goto1), Atsunori Kamegawa1), Hitoshi Takamura1) and Masuo Okada1)
|
|
Electromagnetic Microwave Absorption Properties of a Fine Structure Formed from the Sm2Fe17 Compound after Disproportionation in Air or Nitrogen
|
(
pp.446 - 449 )
|
Toru Maeda1), Satoshi Sugimoto1), Toshio Kagotani1), David Book1), Koichiro Inomata1), Hiroyasu Ota1) and Yuji Houjou1)
|
|
A Dilatometric Study of the Martensitic Transformation of Zirconia Containing 1.8∼2.0 mol% Yttria
|
(
pp.450 - 452 )
|
Long-Xian Ding1), Lei Wang1), Masaaki Nagashima1) and Motozo Hayakawa1)
|
|
Cage Structure Development in Furan-Resin-Derived Carbon
|
(
pp.453 - 456 )
|
Junji Yamanaka1), Eiichi Yasuda2), Hidekazu Migita2) and Yasuhiro Tanabe2)
|
|
Preparation of Thick Functionally Graded Layers of Ceramics by Surface Modification of Tantalum and Titanium Using High Temperature Plasma Processing
|
(
pp.457 - 459 )
|
Masanobu Nunogaki1), Masahiro Inoue1) and Katsuki Kitahama1)
|
|
Combustion Synthesis of Aluminum Nitride From Dross
|
(
pp.460 - 463 )
|
Tomohiro Akiyama1), Yoshihisa Hirai2) and Nobuyuki Ishikawa2)
|
|
Stoichiometry Splitting of β Phase in Ni-Al-Mn, Ni-Al-Co and Ni-Al-Fe Ternary Systems
|
(
pp.464 - 470 )
|
Yi Tan1), Tetsumori Shinoda2), Yoshinao Mishima3) and Tomoo Suzuki4)
|
|
Viscosity of Liquid Fe-Cu-Si Alloy Formed in New Melting Process for Domestic Waste Incineration Residue
|
(
pp.471 - 477 )
|
Toshi Washizu1), Tetsuya Nagasaka1) and Mitsutaka Hino1)
|
|
Effect of Al on the Corrosion Behavior of Low Alloy Steels in Wet/Dry Environment
|
(
pp.478 - 483 )
|
Toshiyasu Nishimura1), Akira Tahara1) and Toshiaki Kodama1)
|
|
Effects of Titanium Addition on the Microstructure and Mechanical Behavior of Iron Aluminide Fe3Al
|
(
pp.484 - 490 )
|
Su-Ming Zhu1), Kazushi Sakamoto1), Makoto Tamura1) and Kunihiko Iwasaki1)
|
|
Characteristics of Spray-Dried WC-17 mass%Co Composite Powder Part 1: Effect of Heating
|
(
pp.491 - 495 )
|
Byoung Hee Kim1) and Dong Soo Suhr1)
|
|
Mode of Boron Solubility in Ferrous Alloys
|
(
pp.496 - 501 )
|
N. J. Calos1), E. Graham2), D. R. Cousens4), P. Christodoulou3), C. H. L. Kennard1), L. K. Bekessy5) and S. F. Parker6)
|
|
Is Ductilization of Intermetallics by Nanostructure Processing a Possibility?
|
(
pp.502 - 508 )
|
Sun Ig Hong1) and Challapalli Suryanarayana2)
|
|
The Structure of an Al-Ni-Co Decagonal Quasicrystal Studied by Atomic-Scale Electron Microscopic Observations
|
(
pp.509 - 513 )
|
Kenji Hiraga1) and Tetsu Ohsuna1)
|
|
Thermodynamic Activity of Ga in Ni3Ga
|
(
pp.514 - 519 )
|
Ayako Kushida1), Teruyuki Ikeda1), Hiroshi Numakura1) and Masahiro Koiwa1)
|
|
Fluxless Wetting Properties of the UBM-Coated Si-Wafer to Pb-Free Solders under Different Atmosphere
|
(
pp.520 - 527 )
|
Soon-Min Hong1), Jae-Yong Park1), Choon-Sik Kang1) and Jae-Pil Jung2)
|
|
Formation of Ti-Zr(Hf)-Ni-Cu Amorphous Alloys and Quasicrystal Precipitation upon Annealing
|
(
pp.528 - 531 )
|
Limin Wang1), Chunfei Li1) and Akihisa Inoue2)
|
|
Microstructure of Partially Remelted Thixoformable Mg-Ni Alloys
|
(
pp.532 - 535 )
|
Shaekwang Kim1), Won Ha1) and Youngjig Kim1)
|
|
Prediction of Temperature Rise in Equal Channel Angular Pressing
|
(
pp.536 - 538 )
|
Hyoung Seop Kim1)
|
|
Evaluation of Thermal Stability of Mold Materials for Magnesium Investment Casting
|
(
pp.539 - 542 )
|
Shaekwang Kim1), Taewhan Hong1) and Youngjig Kim1)
|
|
Preparation of Bulk Glassy Mg65Y10Cu15Ag5Pd5 Alloy of 12 mm in Diameter by Water Quenching
|
(
pp.543 - 545 )
|
Kenji Amiya1) and Akihisa Inoue2)
|
|