Direct Crystallization of the Nd2Fe14B Peritectic Phase by Containerless Solidification in a Drop Tube
|
(
pp.806 - 810 )
|
Shunpei Ozawa1), Mingjun Li1), Suguru Sugiyama2), Itaru Jimbo2) and Kazuhiko Kuribayashi1)
|
|
Micro-Segregation along the Monovariant Line in a Ternary Eutectic Alloy System
|
(
pp.811 - 818 )
|
Toshiaki Himemiya1)
|
|
Phase-field Simulation of Transient Liquid Phase Bonding Process of Ni Using Ni-P Binary Filler Metal
|
(
pp.819 - 823 )
|
Yukinobu Natsume1), Kenichi Ohsasa1) and Toshio Narita1)
|
|
Analysis of Growth Behavior of a Cellular and Dendritic Interface under a Constrained Growth Condition using a Phase-Field Model
|
(
pp.824 - 828 )
|
Yukinobu Natsume1), Kenichi Ohsasa1), Hisao Esaka2) and Toshio Narita1)
|
|
Analysis of Yield Rate in Single Crystal Casting Process Using an Engineering Simulation Model
|
(
pp.829 - 835 )
|
Hisao Esaka1), Manabu Tamura1) and Kei Shinozuka1)
|
|
Influence of Carbon Content on Solidifying Shell Growth of Carbon Steels at the Initial Stage of Solidification
|
(
pp.836 - 844 )
|
Mikio Suzuki1) and Yuichi Yamaoka2)
|
|
Influence of Copper and Iron on Solidification Characteristics of 356 and 380-Type Aluminum Alloys
|
(
pp.845 - 852 )
|
Piyada Suwanpinij1), Usanee Kitkamthorn2), Ittipon Diewwanit1) and Takateru Umeda1)
|
|
Containerless Solidification and Net Shaping by Splat Quenching of Undercooled Nd2Fe14B Melts
|
(
pp.853 - 860 )
|
Kosuke Nagashio1), Mingjun Li1) and Kazuhiko Kuribayashi1)2)
|
|
Aluminide Coating on Niobium by Arc Surface Alloying
|
(
pp.861 - 865 )
|
Kiyotaka Matsuura1), Takayuki Koyanagi1), Tatsuya Ohmi1) and Masayuki Kudoh1)
|
|
Microstructures and Hardness of Mo Heater Chip Brazed with Au-18 mass%Ni
|
(
pp.866 - 869 )
|
Ikuo Shohji1), Yoshinori Kawabata1) and Yoshitaka Kimura2)
|
|
Cold Model Experiment on Dispersion of Melted Ingots in Hot Dip Plating Bath
|
(
pp.870 - 876 )
|
Jun Kurobe1) and Manabu Iguchi2)
|
|
Cold Model Experiment on Melting Phenomena of Zn Ingot in Hot Dip Plating Bath
|
(
pp.877 - 884 )
|
Jun Kurobe1) and Manabu Iguchi2)
|
|
Size Effect on Dynamic Behavior of Dross in Model Hot Dip Plating Bath
|
(
pp.885 - 892 )
|
Jun Kurobe1) and Manabu Iguchi2)
|
|
Processing of Semi-Solid Gray Cast Iron Using the Cooling Plate Technique
|
(
pp.893 - 900 )
|
Alex Muumbo1), Mitsuharu Takita1) and Hiroyuki Nomura1)
|
|
THE FORTY-EIGHTH GOLD MEDALIST OF THE JAPAN INSTITUTE OF METALS, 2003 Physical Metallurgy and Micromechanics
|
(
pp.901 - 906 )
|
Tsutomu Mori1)
|
|
Microstructure of Zr-Al-Cu-Ni-Ag Ingot and the Thermal Stability of Corresponding Glass
|
(
pp.907 - 910 )
|
Zhijie Yan1)2), Jinfu Li1), Shunrong He1), Honghua Wang1) and Yaohe Zhou1)
|
|
Amorphous Co-Ni-P Alloys with High Saturation Magnetization Produced by Electrodeposition
|
(
pp.911 - 916 )
|
Jamil Ahmad1), Katsuhiko Asami1), Akira Takeuchi1), Dmitri V. Louzguine1) and Akihisa Inoue1)
|
|
The Joint Characteristics of Friction Stir Welded AZ91D Magnesium Alloy
|
(
pp.917 - 923 )
|
Won-Bae Lee1), Jong-Woong Kim1), Yun-Mo Yeon2) and Seung-Boo Jung1)
|
|
Three-Dimensional Modeling of the Grain Growth by Coalescence in the Initial Stage of Liquid Phase Sintering
|
(
pp.924 - 930 )
|
Po-Liang Liu1) and Shun-Tian Lin2)
|
|
Damping Capacity of Co-Mn System
|
(
pp.931 - 934 )
|
Young-Seob Seo1), Young-Kook Lee1) and Chong-Sool Choi2)
|
|
Small Dopant Effect on Static Grain Growth and Flow Stress in Superplastic TZP
|
(
pp.935 - 939 )
|
Hidehiro Yoshida1), Hitoshi Nagayama1) and Taketo Sakuma1)
|
|
Analysis of Hydrostatic Tube Bulging with Cylindrical Die Using Static Explicit FEM
|
(
pp.940 - 945 )
|
Takayuki Hama1)2), Motoo Asakawa1), Sadakatsu Fuchizawa3) and Akitake Makinouchi2)
|
|
Experiment and Static Implicit Analysis of Springback in Bend Forming of a Bumper Model
|
(
pp.946 - 950 )
|
Tetsuro Ohwue1), Tohru Yoshida2), Yasuyoshi Shirai3) and Toshio Kikuma4)
|
|
Fragment Size Distribution in Blasting
|
(
pp.951 - 956 )
|
Sang Ho Cho1), Masaaki Nishi2), Masaaki Yamamoto3) and Katsuhiko Kaneko1)
|
|
Chemical Model of the FeCl3-HCl-H2O Solutions at 25°C
|
(
pp.957 - 961 )
|
Man-Seung Lee1), Jong-Gwan Ahn2) and Young-Joo Oh3)
|
|
Corrosion Behavior of Ceramics-Coated Hastelloy-XR Alloy in an Ar-SO2 Atmosphere
|
(
pp.962 - 967 )
|
Rong Tu1) and Takashi Goto1)
|
|
Computer Simulations of the Aluminium-Silicon Anomalous Eutectic Growth Based on Multiphase Field Method
|
(
pp.968 - 972 )
|
Rongshan Qin1) and Eric Rob Wallach1)
|
|
The Effect of Ram Speed on Mechanical and Thermal Properties in ECAE Process Simulation
|
(
pp.973 - 980 )
|
Sung Wook Chung1), Woo-Jin Kim2), Masahide Kohzu1) and Kenji Higashi1)
|
|
In-situ Synthesis of Mg2Si Intermetallics via Powder Metallurgy Process
|
(
pp.981 - 985 )
|
Katsuyoshi Kondoh1), Hideki Oginuma2), Atsushi Kimura3), Shinji Matsukawa3) and Tatsuhiko Aizawa4)
|
|
Plane-Strain Fracture Toughness on Thin AZ31 Wrought Magnesium Alloy Sheets
|
(
pp.986 - 990 )
|
Taisuke Sasaki1), Hidetoshi Somekawa1), Akira Takara2), Yukio Nishikawa2) and Kenji Higashi1)
|
|
Protium Absorption and Desorption Properties of bcc Ti-Fe Solid Solution Alloys Stabilized by Mo Addition
|
(
pp.991 - 994 )
|
Atsunori Kamegawa1), Hidehiro Kudo1), Hitoshi Takamura1) and Masuo Okada1)
|
|
Effects of Inclusion Particles on the Microstructure and Mechanical Properties of High Strength Austempered Ductile Iron
|
(
pp.995 - 1003 )
|
Chang-Zhin Wu1) and Teng-Shih Shih1)
|
|
Thermodynamic Properties of Polybrominated Dibenzo-p-dioxins and Dibenzofurans Calculated by Density Functional Theory
|
(
pp.1004 - 1013 )
|
Xian-Wei Li1), Etsuro Shibata1) and Takashi Nakamura1)
|
|
Transient Liquid Phase Bonding of Nitrogen Containing Duplex Stainless Steel UNS S31803 Using Ni-Cr-Fe-Si-B Insert Metal
|
(
pp.1014 - 1023 )
|
Byongho Rhee1), Sungjoo Roh2) and Dohyang Kim1)
|
|
Sliding Properties of Composite Sprayed Coating between Bronze Powder and Solid Lubricant
|
(
pp.1024 - 1028 )
|
Takeshi Kobayashi1), Toru Maruyama1) and Tsutomu Yasuda1)
|
|
Tensile Properties of Mg-8Al-xRE Alloys from 300 K to 673 K
|
(
pp.1029 - 1035 )
|
Wan-Gye Yang1) and Chun-Hao Koo1)
|
|
Formation of Anodic Films on Mg-Al Alloys in NaOH solutions at Constant Potentials
|
(
pp.1036 - 1041 )
|
Seong-Jong Kim1), Masazumi Okido1), Yoshihiro Mizutani1), Ryoichi Ichino1), Shoji Tanikawa2) and Saori Hasegawa2)
|
|
Effects of Additional Elements on the Glass Formation and Corrosion Behavior of Bulk Glassy Cu-Hf-Ti Alloys
|
(
pp.1042 - 1045 )
|
Chunling Qin1), Katsuhiko Asami1), Tao Zhang1), Wei Zhang2) and Akihisa Inoue1)
|
|
Galvanic Dissolution Behavior of Magnesium-1 mass%manganese-0.5 mass%calcium Alloy Anode for Cathodic Protection in Fresh Water
|
(
pp.1046 - 1048 )
|
Kasumi Yamauchi1) and Shukuji Asakura1)
|
|
Al-Sc Master Alloy Prepared by Mechanical Alloying of Aluminum with Addition of Sc2O3
|
(
pp.1049 - 1052 )
|
Hidenori Fujii1), Hiroomi Akiyama1), Junichi Kaneko1), Makoto Sugamata1) and Ludwik Blaz2)
|
|
Effect of Superplastic Deformation on Thermal Expansion Behavior of Tetragonal Zirconia Polycrystals
|
(
pp.1053 - 1056 )
|
Chujie Wan1), Yoshinobu Motohashi1) and Stefanus Harjo1)
|
|