Lattice Defect Behavior of LaNi4.97Sn0.27 during Hydrogenation Cycles
|
(
pp.1875 - 1877 )
|
Kouji Sakaki1), Yumiko Nakamura1), Yasuharu Shirai2), Robert C. , Jr. Bowman3) and Etsuo Akiba1)
|
|
Preparation of White Heart Malleable Cast Iron in Na2O-K2O-SiO2 Oxide Molten Salt
|
(
pp.1878 - 1881 )
|
Hiroaki Yamamoto1), Kenji Shinzaki1), Masao Morishita1) and Koichiro Koyama1)
|
|
Development of an Internet System for Composite Design and Thermophysical Property Prediction
|
(
pp.1882 - 1885 )
|
Yibin Xu1), Masayoshi Yamazaki1), Haitao Wang1) and Koichi Yagi1)
|
|
Possible Slip Systems in Body Centered Cubic Iron
|
(
pp.1886 - 1889 )
|
Ryuji Watanabe1)
|
|
Hydriding Properties of (Mg1−xMx)Ni2 C15-Type Laves Phase Alloys
|
(
pp.1890 - 1893 )
|
Naoyoshi Terashita1) and Etsuo Akiba2)
|
|
Thermal Conductivity Measurement of Tungsten Oxide Nanoscale Thin Films
|
(
pp.1894 - 1897 )
|
Haitao Wang1), Yibin Xu1), Masahiro Goto2), Yoshihisa Tanaka2), Masayoshi Yamazaki1), Akira Kasahara2) and Masahiro Tosa2)
|
|
Syntheses and Hydrogen Desorption Properties of Metal-Borohydrides M(BH4)n (M=Mg, Sc, Zr, Ti, and Zn; n=2–4) as Advanced Hydrogen Storage Materials
|
(
pp.1898 - 1901 )
|
Yuko Nakamori1), Haiwen Li1), Kazutoshi Miwa2), Shin-ichi Towata2) and Shin-ichi Orimo1)
|
|
Changes in the Surface Characteristics of Gas-Atomized Pure Aluminum Powder during Vacuum Degassing
|
(
pp.1902 - 1905 )
|
Michiaki Yamasaki1) and Yoshihito Kawamura1)
|
|
Molecular-Dynamics Study of Self-Interstitial Diffusion in bcc-Iron
|
(
pp.1906 - 1909 )
|
Katsuyuki Kusunoki1)
|
|
Synthesis of Ti3SiC2 through Pulse Discharge Sintering Powder Mixture Containing Coarse Ti
|
(
pp.1910 - 1913 )
|
Yong Zou1), Zheng Ming Sun1), Hitoshi Hashimoto1) and Shuji Tada1)
|
|
Substitution Effect of Rare Earth on Hydrogenation for AB5-Type Alloys
|
(
pp.1914 - 1917 )
|
Daisuke Endo1) and Etsuo Akiba2)
|
|
Role of Iridium in Hot Corrosion Resistance of Pt-Ir Modified Aluminide Coatings with Na2SO4-NaCl Salt at 1173 K
|
(
pp.1918 - 1921 )
|
Ying-Na Wu1), Akihiro Yamaguchi1)2), Hideyuki Murakami1) and Seiji Kuroda1)
|
|
Effects of Additional Hf on the Thermal Stability and Mechanical Properties of Cu-Zr-Ag Bulk Glassy Alloys
|
(
pp.1922 - 1925 )
|
Fei Jia1), Wei Zhang1) and Akihisa Inoue1)
|
|
Preparation of a Wide Zr55Al10Ni5Cu30 Metallic Glass Sheet by a Twin-Roller Type Casting Method and Its Mechanical Properties
|
(
pp.1926 - 1929 )
|
Ichiro Seki1), Kimio Wakoh1), Asahi Kawashima1), Hisamichi Kimura1) and Akihisa Inoue1)
|
|
Nanocrystallization of Cu50Zr45Ti5 Metallic Glass Induced by Electron Irradiation
|
(
pp.1930 - 1933 )
|
Guoqiang Xie1), Qingsheng Zhang1), Dmitri V. Louzguine-Luzgin1), Wei Zhang1) and Akihisa Inoue1)
|
|
Corrosion Behavior of Ti-Based Metallic Glasses
|
(
pp.1934 - 1937 )
|
Fengxiang Qin1), Xinmin Wang1), Asahi Kawashima1), Shengli Zhu1), Hisamichi Kimura1) and Akihisa Inoue1)
|
|
Compositional Difference of Thermoelectric Properties in Ag9TlTe5
|
(
pp.1938 - 1940 )
|
Ken Kurosaki1), Atsuko Kosuga1), Keita Goto1), Hiroaki Muta1) and Shinsuke Yamanaka1)
|
|
Thermoelectric Properties of Texture-Controlled Bi1.9Sb0.1Te2.7Se0.3 Compounds Prepared by Angular Extrusion Technique
|
(
pp.1941 - 1944 )
|
Takahiro Hayashi1), Masayoshi Sekine1), Junya Suzuki1) and Yuma Horio1)
|
|
Atomistic Simulation of the Aerosol Deposition Method with Zirconia Nanoparticles
|
(
pp.1945 - 1948 )
|
Hiroshi Ogawa1)
|
|
Structure of Iron/Nickel Composite Cluster Assemblies Prepared by Double Glow-Discharge-Sources
|
(
pp.1949 - 1952 )
|
Atsushi Monden1), Ryoji Katoh1), Dong-Liang Peng1) and Kenji Sumiyama1)
|
|
Morphology and Composition-Controls of CuxS Nanocrystals Using Alkyl-Amine Ligands
|
(
pp.1953 - 1956 )
|
Keiichi Itoh1), Toshihiro Kuzuya2) and Kenji Sumiyama1)
|
|
High-Pressure Synthesis of Novel Hydride in Mg-Ni (-H) System
|
(
pp.1957 - 1960 )
|
Riki Kataoka1), Yasuyuki Goto1), Atsunori Kamegawa1), Hitoshi Takamura1) and Masuo Okada1)
|
|
Effect of Sigma Phase in Co-29Cr-6Mo Alloy on Corrosion Behavior in Saline Solution
|
(
pp.1961 - 1964 )
|
Shingo Kurosu1), Naoyuki Nomura2) and Akihiko Chiba2)
|
|
Fatigue Behavior of Ceramic Matrix Composite Oxidized at Intermediate Temperatures
|
(
pp.1965 - 1967 )
|
Shijie Zhu1)
|
|
Liquid Solubility of Manganese and Its Influence on Grain Size of Mg-Al Alloys
|
(
pp.1968 - 1974 )
|
Yosuke Tamura1), Tadashi Haitani1) and Norio Kono1)
|
|
Effects of Hot Rolling and Subsequent Tempering on Particle Erosion Behavior of SUS403 Martensitic Stainless Steel
|
(
pp.1975 - 1980 )
|
Dong-Cherng Wen1)
|
|
Measuring Elastic Energy Density of Bulk Metallic Glasses by Nanoindentation
|
(
pp.1981 - 1984 )
|
K. Wang1), D. Pan1), M. W. Chen1), W. Zhang2), X. M. Wang2) and A. Inoue2)
|
|
Strengthening and Toughness of AZ61 Mg with Nano SiO2 Particles
|
(
pp.1985 - 1993 )
|
Y. P. Hung1), J. C. Huang1), K. J. Wu2) and Chi Y. A. Tsao2)
|
|
Evaluation of Susceptibility to Hydrogen Embrittlement of 7075 Aluminum Alloy by Hydrogen Addition Using Flax-Treatment Method
|
(
pp.1994 - 1998 )
|
Shin-ichi Komazaki1), Kazuya Kobayashi1), Takenori Nakayama2) and Yutaka Kohno1)
|
|
Improved Wear Resistance through Surface Modification of Zr50Cu30Ni10Al10 Bulk Glassy Alloys
|
(
pp.1999 - 2005 )
|
Yoshihiko Yokoyama1), Shinji Fukumoto2), Yoshihiro Oka3), Mitsuyasu Yatsuzuka3), Harushige Tsubakino2) and Akihisa Inoue1)
|
|
Creep Characterization of Aluminum-Magnesium Solid-Solution Alloy through Self-Similar Microindentation
|
(
pp.2006 - 2014 )
|
Hidenari Takagi1), Ming Dao2), Masami Fujiwara1) and Masahisa Otsuka3)
|
|
Kinetic Study on the Leaching of Pt, Pd and Rh from Automotive Catalyst Residue by Using Chloride Solutions
|
(
pp.2015 - 2024 )
|
Yucai Cao1), Sri Harjanto2), Atsushi Shibayama1)3), Isao Naitoh4), Toshiyuki Nanami4), Koichi Kasahara4), Yoshiharu Okumura5) and Toyohisa Fujita6)
|
|
Calorimetric Investigations of Liquid Cu-In-Sn Alloys
|
(
pp.2025 - 2032 )
|
Zuoan Li1)2), Sabine Knott1), Zhiyu Qiao2) and Adolf Mikula1)
|
|
Evaluation of Cell Toxicity and Surface Properties of Surface Modified Ti and Ti Alloys
|
(
pp.2033 - 2037 )
|
Oh-Seong Kwon1), Hyeoung-Ho Park1), Oh-Yon Lee1) and Min-Ho Lee2)
|
|
Effect of ZrO2 Addition to the CaO-SiO2-MgO-CaF2 Slags on the Sulfur Removal from the 16Cr-14Ni Stainless Steel Melts
|
(
pp.2038 - 2043 )
|
Joo Hyun Park1) and Dong Joon Min2)
|
|
Determination of Standard Gibbs Energy of Formation of Al2Nd by Solution Calorimetry and Heat Capacity Measurement from Near Absolute Zero Kelvin
|
(
pp.2044 - 2048 )
|
Hiroaki Yamamoto1), Masao Morishita1) and Minoru Kusumoto1)
|
|
Explosive Welding of Titanium/Stainless Steel by Controlling Energetic Conditions
|
(
pp.2049 - 2055 )
|
Palavesamuthu Manikandan1), Kazuyuki Hokamoto2), Andrei A. Deribas3), Krishnamurthy Raghukandan4) and Ryuichi Tomoshige5)
|
|
Synthesis of Ni Nanopowders Using an EHA System
|
(
pp.2056 - 2059 )
|
Desheng Ai1) and Shinhoo Kang1)
|
|
Effect of Cooling Rate on Mg17Al12 Volume Fraction and Compositional Inhomogeneity in a Sand-Cast AZ91D Magnesium Plate
|
(
pp.2060 - 2067 )
|
Chi-Yuan Cho1), Jun-Yen Uan1) and Te-Chang Tsai2)
|
|
Numerical Analysis of Thermoelectric Properties of Bi88Sb12 by the Multi-Carrier Model
|
(
pp.2068 - 2071 )
|
Shigetoshi Sota1), Toshiyasu Kodama1), Masaki Itoh1), Hiroyuki Noguchi1), Hiroyuki Kitagawa1), Kazuhiro Hasezaki1) and Yasutoshi Noda1)
|
|
Production of Bulk Glassy Alloy Parts by a Levitation Melting-Forging Method
|
(
pp.2072 - 2075 )
|
Xinmin Wang1), Shengli Zhu1), Hisamichi Kimura1) and Akihisa Inoue1)
|
|
Electrolytic Copper Deposition from Ammoniacal Alkaline Solution Containing Cu(I)
|
(
pp.2076 - 2080 )
|
Kazuya Koyama1), Mikiya Tanaka1), Yukio Miyasaka2) and Jae-chun Lee3)
|
|
Preparation of Highly Active Methanol Steam Reforming Catalysts from Glassy Cu-Zr Alloys with Small Amount of Noble Metals
|
(
pp.2081 - 2085 )
|
Takeshige Takahashi1), Makoto Kawabata1), Takami Kai1), Hisamichi Kimura2) and Akihisa Inoue2)
|
|
Abnormal Enhancement of Ordered Phase in Sputter-Deposited (Fe1−xCox)59Pt41 Thin Films
|
(
pp.2086 - 2091 )
|
Yu-Cheng Lai1), Yen-Hwei Chang1), Guo-Ju Chen2), Kuo-Feng Chiu3) and Yen-Chia Chen1)
|
|
Investigations on the Solidification Behavior of Al-Fe-Si Alloy in an Alternating Magnetic Field
|
(
pp.2092 - 2098 )
|
Yi Han1), Chunyan Ban1), Haitao Zhang1), Hiromi Nagaumi2), Qixian Ba1) and Jianzhong Cui1)
|
|
A New Co-Base Superalloy Strengthened by γ′ Phase
|
(
pp.2099 - 2102 )
|
Chuanyong Cui1), Dehai Ping1), Yuefeng Gu1) and Hiroshi Harada1)
|
|
Syntheses and Characterization of Bulky Mesoporous Silica MCM-41 by Hydrothermal Hot-Pressing Method
|
(
pp.2103 - 2105 )
|
Hidezumi Nagata1), Mari Takimura2), Yuki Yamasaki3) and Atsushi Nakahira1)
|
|
Effect of Rhenium Addition on Tungsten Diffusivity in Iron-Chromium Alloys
|
(
pp.2106 - 2108 )
|
Tomonori Kunieda1), Koji Yamashita1), Yoshinori Murata1), Toshiyuki Koyama2) and Masahiko Morinaga1)
|
|
Characterization of β′ Phase Precipitates in an Mg-5 at%Gd Alloy Aged in a Peak Hardness Condition, Studied by High-Angle Annular Detector Dark-Field Scanning Transmission Electron Microscopy
|
(
pp.2109 - 2112 )
|
Masahiko Nishijima1), Kenji Hiraga1), Michiaki Yamasaki2) and Yoshihito Kawamura2)
|
|
Atomic Size Effect in Impurity Induced Grain Boundary Embrittlement
|
(
pp.2113 - 2114 )
|
W. T. Geng1), A. J. Freeman2) and G. B. Olson3)
|
|