Effect of Rapid Thermal Annealing on the Electrical and Structural Properties of Se Schottky Contacts to n-Type Si
|
(
pp.1067 - 1072 )
|
V. Janardhanam1), Yeon-Ho Kil2), Kyu-Hwan Shim2), V. Rajagopal Reddy3), Chel-Jong Choi1) 2)
|
|
An Attempt to Image Chemical Ordering in Close-Packed Layer of Mg–Zn–Y 18R Long-Period Stacking-Ordered Structure by Scanning Tunneling Microscopy
|
(
pp.1073 - 1076 )
|
Shu Kurokawa1), Akihiro Yamaguchi1), Akira Sakai1)
|
|
Effect of Grain Boundary Structure on Misorientation Change of Pure Copper Bicrystals Pressed by One-Pass Equal-Channel Angular Pressing
|
(
pp.1077 - 1082 )
|
Kentoku Hirayama1), Kazuki Nagai2), Hiroshi Fujiwara2), Hiroyuki Miyamoto2)
|
|
In-Situ Neutron Diffraction Study on Tensile Behavior of LPSO Mg–Zn–Y Alloys
|
(
pp.1083 - 1086 )
|
Kazuya Aizawa1), Wu Gong1), Stefanus Harjo1), Jun Abe1), Takaaki Iwahashi1), Takashi Kamiyama2)
|
|
Filtering of Acoustic Emission Signals for the Accurate Identification of Fracture Mechanisms in Bending Tests
|
(
pp.1087 - 1094 )
|
Eva Martinez-Gonzalez1), Ingrid Picas2), Jordi Romeu1), Daniel Casellas2)
|
|
In-Situ TEM Observation of Dislocation Interaction with Cavity in Ion-Irradiated Pure Vanadium during Tensile Test
|
(
pp.1095 - 1101 )
|
Kouichi Tougou1), Kimihiro Nogiwa1), Akihito Shikata1), Ken-ichi Fukumoto1)
|
|
Distinguishing Stress Concentration or Cracking in Ferromagnetic Material Using Abnormal Magnetic Signals
|
(
pp.1102 - 1104 )
|
Shi Changliang1) 2), He Peng1), Dong Shiyun3), Xu Binshi3)
|
|
Crack and Electrical Resistance Behaviors of Carbon Nanotube-Based Polymer Composites under Mixed-Mode I/II Loading
|
(
pp.1105 - 1109 )
|
Tomo Takeda1), Yasuhide Shindo1), Fumitsugu Naraoka1), Yu Kuronuma1), Fumio Narita1)
|
|
Effect of Carbide Size Distribution on the Impact Toughness of Tempered Martensitic Steels with Two Different Prior Austenite Grain Sizes Evaluated by Instrumented Charpy Test
|
(
pp.1110 - 1119 )
|
Shigeto Takebayashi1) 2), Kohsaku Ushioda1), Naoki Yoshinaga3), Shigenobu Ogata2)
|
|
Dealloying Behaviours of an Equiatomic TiCu Alloy
|
(
pp.1120 - 1125 )
|
Zhenhua Dan1) 2), Fengxiang Qin1), Yu Sugawara2), Izumi Muto2), Nobuyoshi Hara2)
|
|
Fundamental Characteristics of Work Deformation and Forging Load by High-Speed Large-Reduction Forging — Production Technology for Fine Grained Steel by Large Deformation Forging I —
|
(
pp.1126 - 1130 )
|
Masaru Miyake1), Takuro Yazaki1), Yasuhiro Sodani2)
|
|
Solidification Microstructure and Critical Conditions of Shrinkage Porosity Generation in Die Casting Process of JIS-ADC12 (A383) Alloy
|
(
pp.1131 - 1139 )
|
Masafumi Hamasaki1), Hirofumi Miyahara2)
|
|
Controlling Oxygen Content by Varying Oxygen Partial Pressure in Chromium Oxynitride Thin Films Prepared by Pulsed Laser Deposition
|
(
pp.1140 - 1144 )
|
Kazuma Suzuki1), Toshiyuki Endo1), Teruhisa Fukushima1), Aoi Sato1), Tsuneo Suzuki1), Tadachika Nakayama1), Hisayuki Suematsu1), Koichi Niihara1)
|
|
Synthesis of Silver Nanoparticles with Tunable Morphologies via a Reverse Nano-Emulsion Route
|
(
pp.1145 - 1148 )
|
Anni Feng1), Shuang Wu1), Senyuan Chen1), Huan Zhang1), Wenyao Shao1), Zongyuan Xiao1)
|
|
Controlled Semisolid Forging of Aluminium Alloys Using Mechanical Servo Press to Manufacture Products with Homo- and Heterogeneous Microstructures
|
(
pp.1149 - 1154 )
|
Jun Yanagimoto1), Jian-Bo Tan2), Sumio Sugiyama1), Yi Meng3)
|
|
Effects of Electrical Current on Microstructure and Interface Properties of Sn–Ag–Cu/Ag Photovoltaic Ribbons
|
(
pp.1155 - 1159 )
|
Kuan-Jen Chen1), Fei-Yi Hung2), Truan-Sheng Lui2), Li-Hui Chen2), Dai-Wen Qiu2), Ta-Lung Chou3)
|
|
Effect of Gamma Radiation on Properties of a Calcium Phosphate-Calcium Sulfate Composite Cement
|
(
pp.1160 - 1165 )
|
Chang-Keng Chen1), Chien-Ping Ju1), Jing-Wei Lee2), Jiin-Huey Chern Lin1)
|
|
Creation of Adhesive Force between Laminated Sheets of Polyurethane (PU) and Polytetrafluoruethylene (PTFE) by Homogeneous Low Energy Electron Beam Irradiation Prior to Hot-Press for Bio-Adaptable Application
|
(
pp.1166 - 1170 )
|
Yusuke Miyazawa1), Masato Uyama1), Sho Ishii1), Masae Kanda2), Yoshitake Nishi1)
|
|
Heating Effect of Polycrystalline SiGe/Si Thin Films on Phase Transition of GeSbTe Films
|
(
pp.1171 - 1175 )
|
Seung-Yun Lee1)
|
|
Effect of Ion Water Washing of Neutralized Sludge Contaminated by High Concentrations of Chloride
|
(
pp.1176 - 1181 )
|
Chiharu Tokoro1), Yuji Oda1), Shuji Owada1), Hiroshi Hayashi2)
|
|
Estimation of Plateau Stress of Porous Aluminum Based on Mean Stress on Maximum-Porosity Cross Section
|
(
pp.1182 - 1186 )
|
Takao Utsunomiya1), Ryo Yamaguchi2), Yoshihiko Hangai2), Osamu Kuwazuru3), Nobuhiro Yoshikawa4)
|
|
Thermal Fatigue Behavior of Nitrocarburized and Low Pressure Nitrided Modified JIS SKD61 Hot Work Mold Steel
|
(
pp.1187 - 1194 )
|
Shu-Hung Yeh1), Liu-Ho Chiu1), Wan-Chung Lo2), Chien-Lung Huang2)
|
|
Conditions for Osteoblast Arrangement Induced under Long-Term Cyclic Stretching
|
(
pp.1195 - 1199 )
|
Aira Matsugaki1), Natsuko Fujiwara1), Takayoshi Nakano1)
|
|
Influence of Silicon on Intergranular Corrosion for Aluminum Alloys
|
(
pp.1200 - 1208 )
|
Yoshiyuki Oya1), Yoichi Kojima1), Nobuyoshi Hara2)
|
|
Behavior of Extraction, Stripping, and Separation Possibilities of Rhenium and Molybdenum from Molybdenite Roasting Dust Leaching Solution Using Amine Based Extractant Tri-Otyl-Amine (TOA)
|
(
pp.1209 - 1212 )
|
Jingu Kang2), Yung-Uk Kim2), Sung-Ho Joo1) 2), Ho-Sung Yoon1), J. Rajesh Kumar1), Kyung-Ho Park1), P. K. Parhi1), Shun Myung Shin1) 2)
|
|
Microstructures and Mechanical and Electrical Properties of Hypoeutectic Cu-1, C-3 and Cu-5 at%Zr Alloy Wires Preprocessed by Spark Plasma Sintering
|
(
pp.1213 - 1219 )
|
Naokuni Muramatsu1), Takashi Goto2)
|
|
Leaching Behavior of Copper, Zinc and Lead from Contaminated Soil with Citric Acid
|
(
pp.1220 - 1223 )
|
Hongki Park1), Kyungbae Jung1), Richard Diaz Alorro2), Kyoungkeun Yoo1)
|
|
Anomalous Temperature Dependence of Crystalline-to-Amorphous Transformation Induced by High-Pressure Torsion in Zr50(Cu,Al)50
|
(
pp.1224 - 1227 )
|
Fanqiang Meng1), Koichi Tsuchiya1) 2), Qingsong Mei1), Baozhen Jiang1) 2), Yoshihiko Yokoyama3)
|
|
Morphology Characterization of Multi-Walled Carbon Nanotubes in Sn–58Bi/CNTs Composites
|
(
pp.1228 - 1231 )
|
Xiaochun Lv1), Tiesong Lin1), Jun Wang1), Jing An2), Peng He1)
|
|
Isothermal Crystallization of Iron-Based Amorphous Alloys in a High Magnetic Field
|
(
pp.1232 - 1235 )
|
Reisho Onodera1), Shojiro Kimura1), Kazuo Watanabe1), Yoshihiko Yokoyama2), Akihiro Makino2), Keiichi Koyama3)
|
|
Microstructure and Magnetic Properties of Mn–Sn–N and Mn–Sn–Co–N Alloys
|
(
pp.1236 - 1239 )
|
Keita Isogai1), Keita Shinaji1), Tsuyoshi Mase1), Masashi Matsuura1), Nobuki Tezuka1), Satoshi Sugimoto1)
|
|