You are not logged in Total: 7journals, 20,272articles Online
AccountAccount
Login / Register
Forgot Login?
 
Main menuMain menu
What's new
Journal list
Visiting ranking
Phrase ranking
Polls
About us
 
SearchSearch
 
Journal Site
Advanced Search
 

Home  >  Journal list  >  MATERIALS TRANSACTIONS  >  Vol.45  No.10 (2004)  >  pp.3018-3022

MATERIALS TRANSACTIONS
<<Previous article Vol.45  No.10 (2004)   pp.3018 - 3022 Next article>>

Optimization of Hot Rolling Process of Gravity Cast AZ31-xCa (x = 0∼2.0 mass%) Alloys

Chang Dong Yim1), Bong Sun You1), Jin Su Lee2) and Wan Chul Kim2)
1) Materials Technology Department, Korea Institute of Machinery and Materials
2) School of Materials Science and Engineering, Hong-ik University


In this study, the effects of Ca content and processing variables on the external surfaces and tensile properties of hot-rolled AZ31-xCa sheets were evaluated systematically. The number and length of side crack were decreased with increasing preheating temperature and decreasing reduction ratio per pass and Ca content. The UTS and YS were not strongly dependent on the Ca content but the elongation decrease with increasing Ca content. The amount of decrease in elongation due to increase in Ca content was least when the sheets were fabricated under preheating temperature of 400°C and reduction ratio per pass of 15%. The sheets had the sound external features with little side cracks by homogenization of gravity cast AZ31-xCa alloys before hot rolling. In the cases of AZ31-xCa alloys containing under 1 mass% Ca, the annealed sheets after homogenization and hot rolling had the similar tensile properties to those of AZ31 sheet.


Keyword:
hot rolling, magnesium alloys sheets, homogenization, annealing

Received: July 05, 2004
Accepted: August 23, 2004 , Published online: June 24, 2005
Copyright (c) 2005 The Japan Institute of Metals

PDFPDF file (J-STAGE)J-STAGEJ-STAGE


SPARC Japan

Terms of Use | Privacy Policy