Low Temperature Swelling in Beta-SiC Associated with Point Defect Accumulation
|
(
pp.612 - 616 )
|
Yutai Katoh1), Hirotatsu Kishimoto1) and Akira Kohyama1)
|
|
Effect of Fiber Properties on Neutron Irradiated SiC/SiC Composites
|
(
pp.617 - 621 )
|
Tatsuya Hinoki1), Yutai Katoh1) and Akira Kohyama1)
|
|
Effects of Helium on Radiation Behavior in Low Activation Fe-Cr-Mn Alloys
|
(
pp.622 - 626 )
|
Hu Benfu1), Hiroshi Kinoshita2), Tamaki Shibayama2) and Heishichiro Takahashi2)
|
|
Influence of Ion-Irradiation on Hardness Change in Type 304 Stainless Steel Weldment Containing Delta(δ) Ferrite
|
(
pp.627 - 632 )
|
Se-Hwan Chi1), Yong-Kwan Shin2), Gen-Chan Kim1), Young-Jig Kim3) and Jun-Hwa Hong1)
|
|
The Effect of 800 MeV Proton Irradiation on the Mechanical Properties of Tungsten
|
(
pp.633 - 637 )
|
Stuart Andrew Maloy1), Michael Richard James1), Walter Sommer, jr.1), Gordon Jesse Willcutt, jr.2), Manuel Lopez3) and Tobias James Romero3)
|
|
Improvement of Corrosion Resistance and Structural Change in 304 Stainless Steel by means of Ion-Mixing
|
(
pp.638 - 640 )
|
Yasuyuki Masumoto1), Mitsuhiro Takeda2), Takanori Suda1), Seiichi Watanabe1), Soumei Ohnuki1), Toshiaki Ohtsuka1) and Kazuhiro Ikezawa3)
|
|
A Numerical Study on Composition Pattern Formation in Immiscible Alloys under Irradiation Condition
|
(
pp.641 - 645 )
|
Yoshihisa Enomoto1) and Masataka Sawa1)
|
|
Generation of Nanosized Structures on Ni and Fe Surfaces by Electron Irradiation
|
(
pp.646 - 649 )
|
Keisuke Niwase1) and Hiroaki Abe2)
|
|
Electron-Irradiation-Induced Amorphization in Mo/Si Nano-Multilayer Material
|
(
pp.650 - 653 )
|
Etsuko Shioya1), Takanori Suda1), Seiichi Watanabe1), Somei Ohnuki1), Masahiko Ishino2), Osamu Yoda2), Hiroaki Abe3) and Fritz Phillip4)
|
|
Self-Diffusion of 22Na and 137Cs in Simulated Nuclear Waste Glass
|
(
pp.654 - 659 )
|
Katsuhiko Nonaka1), Hideo Nakajima2), Seiichiro Mitsui3) and Jun-ich Echigoya1)
|
|
Effects of Metastable Phase Formation on the Magnetic Properties of Pr4.5Fe77B18.5 Amorphous Ribbons
|
(
pp.660 - 666 )
|
Yun-Chul Jung1), Yasuya Ohmori1), Kiyomichi Nakai1), Satoshi Hirosawa2) and Hirokazu Kanekiyo2)
|
|
Synthesis of Fe-Cu Nanoparticles by Mechanochemical Processing Using a Ball Mill
|
(
pp.667 - 673 )
|
Yoshikazu Todaka1), Paul Gerard McCormick2), Koichi Tsuchiya1) and Minoru Umemoto1)
|
|
Formation of Anomalous Defect Structure on GaSb Surface by Low Temperature Sn Ion-Implantation
|
(
pp.674 - 680 )
|
Noriko Nitta1), Masafumi Taniwaki1), Tomoo Suzuki1), Yoshihiko Hayashi2), Yuhki Satoh2) and Toshimasa Yoshiie2)
|
|
Structure and Transport Properties of (Bi1-xSbx)2Te3 Thermoelectric Materials Prepared by Mechanical Alloying and Pulse Discharge Sintering
|
(
pp.681 - 687 )
|
Liu Xue-Dong1) and Yong-Ho Park1)
|
|
Phase Equilibria in Nb-W-rich Zone of the Nb-W-Si Ternary System
|
(
pp.688 - 693 )
|
Chaoli Ma1), Yi Tan1), Aoki Kasama1) and Shuji Hanada2)
|
|
Mössbauer Spectroscopic Study of Rust Formed on a Weathering Steel and a Mild Steel Exposed for a Long Term in an Industrial Environment
|
(
pp.694 - 703 )
|
Takayuki Kamimura1), Saburo Nasu2), Takashi Tazaki2), Kaori Kuzushita2) and Shotaro Morimoto2)
|
|
Exohedral Bonding Nature of Si Atom on the Ba@Si28 Cluster; Ab Initio Study
|
(
pp.704 - 707 )
|
Kazuo Tsumuraya1), Takatoshi Nagano1), Haruki Eguchi1)2) and Hiroyuki Takenaka1)
|
|
New Bulk Glassy Ni-Based Alloys with High Strength of 3000 MPa
|
(
pp.708 - 711 )
|
Tao Zhang1) and Akihisa Inoue1)
|
|
Characterization of Directionally Solidified B4C-TiB2 Composites Prepared by a Floating Zone Method
|
(
pp.712 - 720 )
|
Itaru Gunjishima1), Takaya Akashi1) and Takashi Goto1)
|
|
Solid-liquid Interface Energy of Metals at Melting Point and Undercooled State
|
(
pp.721 - 726 )
|
Zengyun Jian1), Kazuhiko Kuribayashi1) and Wanqi Jie2)
|
|
Non-Destructive Evaluation of Fatigue Damage in Type 316 Stainless Steel Using Positron Annihilation Lineshape Analysis
|
(
pp.727 - 734 )
|
Yasuhiro Kawaguchi1), Noriko Nakamura2) and Satoru Yusa2)
|
|
Processing of a Continuous Ceramic Fiber/Iron Alloy Composite
|
(
pp.735 - 740 )
|
Hidekazu Sueyoshi1), Tomohito Maruno1), Koichi Yamamoto1), Yoshihiro Hirata2), Soichiro Sameshima2), Shigeru Uchida3), Shuichi Hamauzu4) and Sumihiko Kurita5)
|
|
Quantitative Research on Color of Cu-Mn-Zn Alloys
|
(
pp.741 - 744 )
|
Yu-Ping Zhang1)2), Jin-Xu Zhang1) and Jian-Sheng Wu1)
|
|
Effect of Mold Material and Binder on Metal-Mold Interfacial Reaction for Investment Castings of Titanium Alloys
|
(
pp.745 - 750 )
|
Myoung-Gyun Kim1), Shae. K. Kim1) and Young-Jig Kim1)
|
|
Effect of Surface Finishes on Ball Shear Strength in BGA Joints with Sn-3.5 mass%Ag Solder
|
(
pp.751 - 756 )
|
Chang-Bae Lee1), In-Young Lee1), Seung-Boo Jung1) and Chang-Chae Shur1)
|
|
Effect of Equal Channel Angular Pressing on the Distribution of Reinforcements in the Discontinuous Metal Matrix Composites
|
(
pp.757 - 761 )
|
Si-Young Chang1), Ki-Seung Lee2), Seung Kyun Ryu3), Kyung-Tae Park4) and Dong Hyuk Shin2)
|
|
Growth Condition and X-ray Analysis of Single Al64Cu23Fe13 Icosahedral Quasicrystal by the Czochralski Method
|
(
pp.762 - 765 )
|
Yoshihiko Yokoyama1), Yoshie Matsuo2), Kazuki Yamamoto2) and Kenji Hiraga3)
|
|
Soft Magnetic Bulk Glassy Fe-B-Si-Nb Alloys with High Saturation Magnetization above 1.5 T
|
(
pp.766 - 769 )
|
Akihisa Inoue1) and Baolong Shen1)
|
|
New V45Zr20Ni20Cu10Al2.5Pd2.5 Glassy Alloy Powder with Wide Supercooled Liquid Region
|
(
pp.770 - 772 )
|
M. Sherif El-Eskandarany1) and Akihisa Inoue2)
|
|
Account
Main menu
Search
