Mechanism of Crack Generation in Carbide Surface Layer of Laser-Clad Iron Alloys
|
(
pp.1261 - 1265 )
|
Akio Kagawa1), Yasuhira Ohta2) and Kazunori Nakayama1)
|
|
THE FORTY-SEVENTH HONDA MEMORIAL LECTURE Recent Developments and the Future of Computational Science on Microstructure Formation
|
(
pp.1266 - 1272 )
|
Toru Miyazaki1)
|
|
Quantification of Precipitation Hardening and Evolution of Precipitates
|
(
pp.1273 - 1282 )
|
Zhanli Guo1) and Wei Sha1)
|
|
Annealing Twinning in Boron-Doped Ni3Al
|
(
pp.1283 - 1290 )
|
Fu-Gao Wei1) and Yoshinao Mishima1)
|
|
Formation of Protection Layer during Oxidation of Al-Implanted TiN Coating
|
(
pp.1291 - 1297 )
|
Thananan Akhadejdamrong1), Atsushi Mitsuo2), Chihiro Iwamoto3), Takahisa Yamamoto4), Yuichi Ikuhara5) and Tatsuhiko Aizawa1)
|
|
Compressive Deformation Characteristics of Open-Cell Mg Alloys with Controlled Cell Structure
|
(
pp.1298 - 1305 )
|
Yasuo Yamada1), Cui’e Wen1), Koji Shimojima1), Hiroyuki Hosokawa1), Yasumasa Chino1) and Mamoru Mabuchi1)
|
|
A Mechanism of Nucleation of Crystals
|
(
pp.1306 - 1311 )
|
Hiroshi Fujita1)
|
|
Growth Direction of Cellular and Dendritic Interface in a Constrained Growth Condition
|
(
pp.1312 - 1317 )
|
Hisao Esaka1), Hiroyasu Daimon1), Yukinobu Natsume2), Kenichi Ohsasa2) and Manabu Tamura1)
|
|
Surface Morphology and Crystallographic Orientation of Electrodeposited Iron Films
|
(
pp.1318 - 1324 )
|
Koichiro Inoue1), Takeshi Nakata1) and Tohru Watanabe2)
|
|
Effect of Carbon on Tensile Properties and Wear Behavior of P/M FeAl Alloy
|
(
pp.1325 - 1331 )
|
Xingsheng Guan1), Su-Ming Zhu1), Koji Shibata1) and Kunihiko Iwasaki1)
|
|
Preparation of Porous Hydroxyapatite/α-Tricalcium Phosphate Composites by a Colloidal Process
|
(
pp.1332 - 1335 )
|
Hiroyuki Y. Yasuda1)2), Shigeo Mahara3), Naohiro Terashita1) and Yukichi Umakoshi1)2)
|
|
Fluxless Sn-3.5 mass%Ag Solder Bump Flip Chip Bonding by Ultrasonic Wave
|
(
pp.1336 - 1340 )
|
Soon-Min Hong1), Choon-Sik Kang2) and Jae-Pil Jung3)
|
|
Effects of Mg Addition on δ’ Precipitation and Mechanical Properties of Al-Li-Zr Alloys Containing Ti and/or V
|
(
pp.1341 - 1347 )
|
Jiangke Ying1) and Teruo Ohashi1)
|
|
Size Effect of Copper Precipitation Particles on Electrochemical Nanoscopic Galvanic Behavior in Cu-Added Ultra Low Carbon Steel
|
(
pp.1348 - 1351 )
|
Toshihei Misawa1), Noriaki Kobayashi1), Shin-ichi Komazaki1) and Masaaki Sugiyama2)
|
|
Formation Mechanism of Low Contact Resistance PdZn-based Ohmic Contacts for p-type InP
|
(
pp.1352 - 1359 )
|
Hirokuni Asamizu1), Akira Yamaguchi2), Yasuhiro Iguchi2), Tadashi Saitoh2) and Masanori Murakami1)
|
|
A Study on Electro-Discharge Machined Surfaces of Ferritic SG Cast Irons
|
(
pp.1360 - 1366 )
|
De-Chang Tsai1), Jenn-Ming Song1), Truan-Sheng Lui1) and Li-Hui Chen1)
|
|
Thermal Stability and Mechanical Properties of Bulk Glassy Cu-Zr-Ti-(Nb, Ta) Alloys
|
(
pp.1367 - 1370 )
|
Tao Zhang1) and Akihisa Inoue1)2)
|
|
Effects of Excess Mg and Si on the Isothermal Ageing Behaviours in the Al-Mg2Si Alloys
|
(
pp.1371 - 1380 )
|
Long Chau Doan1), Kiyomichi Nakai1), Yoshitsugu Matsuura1), Sengo Kobayashi1) and Yasuya Ohmori1)
|
|
Impact Toughness of Weldments in Al-Mg-Si Alloys
|
(
pp.1381 - 1389 )
|
Victor Alexandru Mosneaga1), Tohru Mizutani1), Toshiro Kobayashi1) and Hiroyuki Toda1)
|
|
Effects of Pulse Current on an Aluminum Powder Oxide Layer During Pulse Current Pressure Sintering
|
(
pp.1390 - 1397 )
|
Takekazu Nagae1), Masaru Yokota2), Masateru Nose2), Shogo Tomida1), Takashi Kamiya3) and Shigeoki Saji3)
|
|
DLC Film Fabricated by a Composite Technique of Unbalanced Magnetron Sputtering and PIII
|
(
pp.1398 - 1402 )
|
Feng Ma1), Qiulong Chen1), Xun Cai1), Gang Li1) and Hongtao Ma2)
|
|
Influence of Substrate Bias Voltage on the Properties of Cu Thin Films by Sputter Type Ion Beam Deposition
|
(
pp.1403 - 1408 )
|
Jae-Won Lim1), Yukio Ishikawa2), Kiyoshi Miyake3), Mutsuo Yamashita4) and Minoru Isshiki1)
|
|
Determination of Ti, V, Zr, Nb, Mo and Ta in High-Purity Iron Using Cupferron Co-Precipitation Separation by Axially Viewed ICP-AES with Ultrasonic Nebulization System and a Long Torch
|
(
pp.1409 - 1414 )
|
Kunikazu Ide1) and Yoshisuke Nakamura1)
|
|
Effect of W Alloying and NbC Dispersion on High Temperature Strength at 1773 K and Room Temperature Fracture Toughness in Nb5Si3/Nb In-situ Composites
|
(
pp.1415 - 1418 )
|
Won-Yong Kim1), Hisao Tanaka1) and Shuji Hanada2)
|
|
Comments on Correlation Entropy Theory by Baranyai and Evans
|
(
pp.1419 - 1421 )
|
Isao Yokoyama1)
|
|
Mechanically Induced Solid-State Reaction for Synthesizing New Multicomponent Ta55Zr10Ni10Al10Cu15 Glassy Alloy Powders with Extremely Wide Supercooled Liquid Region
|
(
pp.1422 - 1425 )
|
M. Sherif El-Eskandarany1), Wei Zhang1) and Akihisa Inoue2)
|
|
Account
Main menu
Search
