You are not logged in Total: 7journals, 19,517articles Online
AccountAccount
Login / Register
Forgot Login?
 
Main menuMain menu
What's new
Journal list
Visiting ranking
Phrase ranking
Polls
About us
 
SearchSearch
 
Journal Site
Advanced Search
 

Home  >  Journal list  >  MATERIALS TRANSACTIONS  >  Vol.49 No.5 (2008)

MATERIALS TRANSACTIONS
<<Previous issue Vol.49 No.5 (2008) Next issue>>

Recent Development and Applications of Magnesium Alloys in the Hyundai and Kia Motors Corporation
( pp.894 - 897 )
Jae Joong Kim1) and Do Suck Han1)

 
Suppression of Macroscopic Defects through the Control of Friction between Workpiece and Dies in a Forged Magnesium Alloy Part with Ribs
( pp.898 - 902 )
Akira Takara1), Li-Fu Chian2), Sung Wook Chung2), Hidetoshi Somekawa2), Hiroyuki Watanabe3), Yorinobu Takigawa2) and Kenji Higashi2)

 
Effect of Environmentally Friendly Anodization on the Mechanical Properties and Microstructure of AZ91D Magnesium Alloy
( pp.903 - 908 )
Atsushi Saijo1), Koji Murakami2), Makoto Hino2) and Teruto Kanadani3)

 
Clarification of the Necessary Value of Surface Roughness for Developing Luster on an AZ31 Magnesium Alloy Surface with or without Acid Aqueous Solution Treatment
( pp.909 - 912 )
Miyoshi Ohara1), Haruo Okahara1), Yorinobu Takigawa2) and Kenji Higashi2)

 
Effects of 2 mass% Li Addition on the AZ80 Mg Alloy
( pp.913 - 917 )
P. C. Wang1), C. C. Lin2), T. Y. Huang2), H. C. Lin1), Y. H. Lee1), M. T. Yeh3) and J. Y. Wang4)

 
Microalloying Effects of Ca and Ni on High-Temperature Creep Behavior in Mg-Y-Zn Alloys
( pp.918 - 923 )
Mayumi Suzuki1), Kayo Tsuchida1) and Kouichi Maruyama1)

 
Effects of Alloying Elements on Characteristics of Anodic Oxidized Coatings in Various Mg-Al-Zn Series Alloys
( pp.924 - 930 )
Makoto Hino1), Koji Murakami1), Atsushi Saijo2) and Teruto Kanadani3)

 
Influence of Zn Addition on Aging Response and Corrosion Resistance of Mg-Gd-Nd-Zr Alloy
( pp.931 - 935 )
B. K. Park1), J. H. Jun1) and J. M. Kim2)

 
Effect of Sb and Sr Additions on the Microstructural Evolution of Mg-Sn-Al-Si Based Alloys
( pp.936 - 940 )
D. H. Kang1), G. T. Bae1) and Nack J. Kim1)

 
Effects of Zn/Gd Ratio and Content of Zn, Gd on Phase Constitutions of Mg Alloys
( pp.941 - 944 )
Yong Liu1), Guangyin Yuan1), Song Zhang1), Xinping Zhang1), Chen Lu1) and Wenjiang Ding1)

 
The Effects of Yttrium Element on Microstructure and Mechanical Properties of Mg-5 mass%Al-3 mass%Ca Based Alloys Fabricated by Gravity Casting and Extrusion Process
( pp.945 - 951 )
Hyeon-Taek Son1), Jae-Seol Lee1), Chang-Seog Kang1), Jung-Chan Bae1), Kyosuke Yoshimi2) and Kouichi Maruyama2)

 
Effect of Rare-Earth Elements Y and Dy on the Deformation Behavior of Mg Alloy Single Crystals
( pp.952 - 956 )
Seiji Miura1), Shigeki Imagawa1), Takeshi Toyoda1), Kenji Ohkubo1) and Tetsuo Mohri1)

 
Effect of Solution Treatment on Microstructure Evolution and Mechanical Properties of Mg-6.0Zn-0.6Y-0.5Zr Alloy Processed by Equal Channel Angular Extrusion
( pp.957 - 962 )
Weineng Tang1)2), Rongshi Chen1) and Enhou Han1)

 
Comparison in Deformation and Fracture Behavior of Magnesium during Equal Channel Angular Pressing by Experimental and Numerical Methods
( pp.963 - 966 )
Seung Chae Yoon1), Cheon Hee Bok1), Min Hong Seo2), Taek-Soo Kim3) and Hyoung Seop Kim1)

 
Yield and Densification Behavior of Rapidly Solidified Magnesium Powders
( pp.967 - 971 )
Seung Chae Yoon1), Eun Jeong Kwak1), Taek-Soo Kim2), Byeong Sun Cheon1) and Hyoung Seop Kim1)

 
Effect of Ultrasonic Vibration Pretreatment on Microstructural Evolution and Mechanical Properties of Extruded AZ91 Alloy
( pp.972 - 975 )
Yoshiaki Osawa1), Xinbao Liu1), Susumu Takamori1), Hidetoshi Somekawa1) and Toshiji Mukai1)

 
Effect of CaO on AZ31 Mg Strip Castings
( pp.976 - 979 )
Dong-In Jang1)2), Young-Ok Yoon1), Seung-Boo Jung2) and Shae K. Kim1)

 
Mechanical Properties and Microstructure of Twin-Roll Cast Mg-Zn-Y Alloy
( pp.980 - 985 )
Kyung-Hun Kim1), Jung Gu Lee1)2), Geun Tae Bae1), Jun Ho Bae1) and Nack J. Kim1)

 
Optimization of Heat Treatment in AZ64 Magnesium Alloy
( pp.986 - 989 )
Songmao Liang1), Yuequn Ma1), Rongshi Chen1) and Enhou Han1)

 
Microstructure Evolutions of Rapidly-Solidified and Conventionally-Cast Mg97Zn1Y2 Alloys
( pp.990 - 994 )
Akira Ono1), Eiji Abe1), Takaomi Itoi2), Mitsuji Hirohashi2), Michiaki Yamasaki3) and Yoshihito Kawamura3)

 
Effects of Wavy Roll-Forming on Textures in AZ31B Magnesium Alloy
( pp.995 - 999 )
A. Yamamoto1), Y. Tsukahara1) and S. Fukumoto1)

 
Improvement of Forgeability of a Commercial AZ31B Magnesium Alloy in Cold Backward Extrusion with Counter Pressure
( pp.1000 - 1005 )
Ryo Matsumoto1), Tomoo Kubo1) and Kozo Osakada1)

 
Processing and Mechanical Properties of Fine Grained Magnesium by Equal Channel Angular Pressing
( pp.1006 - 1010 )
Eun Jeong Kwak1), Cheon Hee Bok1), Min Hong Seo2), Taek-Soo Kim3) and Hyoung Seop Kim1)

 
The Influence of Developed Texture on the Mechanical Anisotropy and Deformation Modes of an As-Extruded Mg-Zn-Zr Alloy
( pp.1011 - 1014 )
D. K. Xu1)2), L. Liu2), Y. B. Xu2) and E. H. Han1)

 
Evolution of Ultra-Fine Grains in AZ31 and AZ61 Mg Alloys during Multi Directional Forging and Their Properties
( pp.1015 - 1020 )
H. Miura1), X. Yang1) and T. Sakai1)

 
Effect of the Cyclic Extrusion and Compression Processing on Microstructure and Mechanical Properties of As-Extruded ZK60 Magnesium Alloy
( pp.1021 - 1024 )
Jinbao Lin1)2), Qudong Wang1), Liming Peng1) and Tao Peng1)

 
Microstructure and Mechanical Properties of Mg-Al-Ca-Nd Alloys Fabricated by Gravity Casting and Extrusion Process
( pp.1025 - 1031 )
Hyeon-Taek Son1), Jae-Seol Lee1), Ik-Hyun Oh1), Dae-Guen Kim1), Kyosuke Yoshimi2) and Kouichi Maruyama2)

 
Effects of Homogenization Annealing on Dynamic Recrystallization in Mg-Al-Ca-RE (Rare Earth) Alloy
( pp.1032 - 1037 )
Masataka Hakamada1), Akira Watazu1), Naobumi Saito1) and Hajime Iwasaki2)

 
Production of Alumina-Rich Surface Film on AZ31 Magnesium Alloy by Anodizing with Co-Precipitation of Nano-Sized Alumina
( pp.1038 - 1041 )
S. A. Salman1), R. Ichino1) and M. Okido1)

 
Microstructures and Corrosion Properties on Fluoride Treated Magnesium Alloy
( pp.1042 - 1047 )
A. Yamamoto1), T. Terawaki1) and H. Tsubakino1)

 
Surface Protection Effect of Diffusion Pack Cementation Process by Al-Si Powders with Chloride Activator on Magnesium and Its Alloys
( pp.1048 - 1051 )
Joon Sik Park1), Jeong Min Kim1), Ha Young Kim1), Jae Seol Lee2), Ik Hyun Oh2) and Chang Suck Kang2)

 
Investigation of Stress Corrosion Cracking Behaviors of an AZ91 Magnesium Alloy in 0.1 kmol/m3 Na2SO4 Solution Using Slow Strain Rate Test
( pp.1052 - 1056 )
Jianqiu Wang1), Jian Chen1), Enhou Han1) and Wei Ke1)

 
Mechanism of Corrosion Protection of Anodized Magnesium Alloys
( pp.1057 - 1064 )
Koji Murakami1), Makoto Hino1), Kiyomichi Nakai2), Sengo Kobayashi2), Atsushi Saijo3) and Teruto Kanadani4)

 
Influence of Conversion Coating on Magnesium and Aluminum Alloys by Adhesion Method
( pp.1065 - 1070 )
Manabu Takai1) and Matsufumi Takaya1)

 
Improvement of Corrosion Resistance of Magnesium Alloys by Surface Film with Rare Earth Element
( pp.1071 - 1076 )
Toshihide Takenaka1), Yuji Narazaki1), Nobuo Uesaka1) and Masahiro Kawakami1)

 
Influence of Ga Content on Electrochemical Behavior of Mg-5 at%Hg Anode Materials
( pp.1077 - 1080 )
Yan Feng1), R-Chu Wang1), Kun Yu1), C-Qun Peng1) and W-Xian Li1)

 
Effect of CaO on Oxidation Resistance and Microstructure of Pure Mg
( pp.1081 - 1083 )
Seong-Ho Ha1), Jin-Kyu Lee1) and Shae K. Kim1)

 
Effect of Ca and CaO on the High Temperature Oxidation of AZ91D Mg Alloys
( pp.1084 - 1088 )
Dong-Bok Lee1), Lee-Seok Hong1) and Young-Jig Kim1)

 
Casting Surface of AZ91 Alloy and Its Reaction with Sand Mold
( pp.1089 - 1092 )
Susumu Takamori1), Yoshiaki Osawa1), Takashi Kimura1), Xinbao Liu1) and Toshiji Mukai1)

 
Deformation Characteristics of Recycled AZ91 Mg Alloy Containing Oxide Contaminants
( pp.1093 - 1100 )
Yasumasa Chino1) and Mamoru Mabuchi2)

 
Experimentally and Numerical Study on Deep Drawing Process for Magnesium Alloy Sheet at Elevated Temperatures
( pp.1101 - 1106 )
D. V. Hai1), S. Itoh1), T. Sakai1), S. Kamado1) and Y. Kojima1)

 
Analysis of Strain Transfer through the Mg/Ti Interface Using Crystallographic Orientation Analysis Based on Electron Back-Scattered Diffraction Patterns
( pp.1107 - 1111 )
Hiroaki Kawamoto1), Seiji Miura1), Kaori Yano1), Kenji Ohkubo1) and Tetsuo Mohri1)

 
Experimental Determination of Forming Limit Diagram and Springback Characteristics of AZ31B Mg Alloy Sheets at Elevated Temperatures
( pp.1112 - 1119 )
Hyung Jong Kim1), Sun Chul Choi2), Kyoung Taek Lee3) and Heon Young Kim1)

 
Non-Isothermal Simulation of Warm Circular Cup Deep Drawing Processing of an AZ31 Magnesium Alloy Sheet
( pp.1120 - 1123 )
Myeong Han Lee1), Heon Young Kim2), Heung Kyu Kim3), Gi Deuck Kim3) and Soo Ik Oh1)

 
Simultaneous Control of Shape and Properties of AZ31 Magnesium Alloy Sheets by Incremental Forming
( pp.1124 - 1128 )
Masaaki Otsu1), Yusuke Kai1) and Kazuki Takashima1)

 
Dissimilar Welding of Al and Mg Alloys by FSW
( pp.1129 - 1131 )
Taiki Morishige1), Atsushi Kawaguchi1), Masato Tsujikawa1), Makoto Hino2), Tomotake Hirata3) and Kenji Higashi1)

 
Butt Joining of Magnesium Alloy Sheet by Shot Peening
( pp.1132 - 1136 )
Yasunori Harada1), Makoto Fukunaga1) and Atsushi Yamamoto1)

 
Some Characteristics of AZ31/AZ91 Dissimilar Magnesium Alloy Deposit by Friction Surfacing
( pp.1137 - 1141 )
Dai Nakama1), Kazuyoshi Katoh1) and Hiroshi Tokisue1)

 
Analysis of Explosively Welded Aluminum–AZ31 Magnesium Alloy Joints
( pp.1142 - 1147 )
Seyed Hadi Ghaderi1), Akihisa Mori1) and Kazuyuki Hokamoto1)

 
High Cycle Fatigue Property of Extruded Non-Combustible Mg Alloy AMCa602
( pp.1148 - 1156 )
Kiyotaka Masaki1), Yasuo Ochi2), Toshifumi Kakiuchi2), Keiichi Kurata2), Toru Hirasawa2), Takashi Matsumura2), Yorinobu Takigawa3) and Kenji Higashi3)

 
Relationship between Fatigue Strength and Grain Size in AZ31 Magnesium Alloys
( pp.1157 - 1161 )
Masayuki Tsushida1), Kei Shikada1), Hiromoto Kitahara1), Shinji Ando1) and Hideki Tonda1)

 
Shaping of Helical Gear by Two-Step Cold Extrusion
( pp.1162 - 1167 )
Hajime Yoshida1), Yozo Sawaki1) and Yoshihisa Sakaida1)

 
Pseudo-HIP Combustion Synthesis of FeAl-TiB2 Composites
( pp.1168 - 1174 )
Yuki Obara1), Masayuki Kudoh1) and Kiyotaka Matsuura1)

 
Effect of Specimen Size and Aging on Tensile Properties of Sn-Ag-Cu Lead-Free Solders
( pp.1175 - 1179 )
Ikuo Shohji1), Tsutomu Osawa1), Takashige Matsuki2), Yoshiharu Kariya3), Kiyokazu Yasuda4) and Tadashi Takemoto5)

 
Effects of Glass Transition Temperatures of Films on the Corrosion Resistance after Forming of Pre-Coated Aluminum Sheets
( pp.1180 - 1185 )
Nobuo Hattori1)2), Masaki Tanigawa1) and Masazumi Okido2)

 
Effects of Mg Additions on Microstructure and Optical Properties of Sol-Gel Derived ZnO Thin Films
( pp.1186 - 1191 )
Chien-Yie Tsay1), Min-Chi Wang1) and Shin-Chuan Chiang2)

 
Kinetics of Oxidative Roasting of Complex Copper Concentrate
( pp.1192 - 1198 )
Byung-Su Kim1), Eun-young Kim2), Chi-Kwon Kim1), Hoo-In Lee1) and Jeong-Soo Sohn1)

 
Mechanical Characteristics of Center Bevelled Double Structure Blade
( pp.1199 - 1201 )
Darulihsan Abdul Hamid1), Shigeru Nagasawa1), Yasushi Fukuzawa1), Kiyoshi Kojima2) and Akira Hine3)

 


SPARC Japan

Terms of Use | Privacy Policy