You are not logged in Total: 7journals, 20,727articles Online
AccountAccount
Login / Register
Forgot Login?
 
Main menuMain menu
What's new
Journal list
Visiting ranking
Phrase ranking
Polls
About us
 
SearchSearch
 
Journal Site
Advanced Search
 

Home  >  Journal list  >  Journal of the Ceramic Society of Japan  >  Vol.120  No.1400 (April) (2012)  >  pp.138-142

Journal of the Ceramic Society of Japan
<<Previous article Vol.120  No.1400 (April) (2012)   pp.138 - 142 Next article>>

Joining of alumina by using polycarbosilane and aluminum foil

Ken’ichiro KITA1), Naoki KONDO1), Yasuhisa IZUTSU2) and Hideki KITA1)
1) National Institute of Advanced Industrial Science and Technology (AIST)
2) Stereo Fabric Research Association


  This paper describes a novel experiment in which alumina was joined using polycarbosilane (PCS) and an aluminum foil. PCS was used to design the surface structure of alumina, and the aluminum foil enabled the formation of an area that included the alumina surface designed using PCS; this area could be joined to ceramic materials. A four-point bending test revealed that the flexural strength of both the silicon carbide (SiC) and the silicon oxide (SiO2) pieces that were obtained from alumina whose surfaces were modified to SiC or SiO2 increased, compared with the flexural strength of ceramics joined by alternative methods involving the use of organometallic polymers whose compositions are similar to SiC and SiO2. Moreover, it was apparent that alumina was formed by the reaction of SiO2 with aluminum. However, traces of Al and Si remained in the joining area in both the SiC and SiO2 pieces.


Keyword:
Polycarbosilane, Si Carbide, Si Oxide, Alumina, Joining, Aluminum

Received: December 13, 2011
Accepted: February 06, 2012 , Published online: March 28, 2012
Copyright (c) 2012 The Ceramic Society of Japan

PDFPDF file (J-STAGE)J-STAGEJ-STAGE


SPARC Japan

Terms of Use | Privacy Policy