Stability and Electronic Structures of Pt-Rh Icosahedral Nanoparticles
|
(
pp.1339 - 1343 )
|
Koretaka Yuge1)
|
|
The Structure of an Al-Ni-Ru Monoclinic Phase Al13(Ru,Ni)4
|
(
pp.1344 - 1348 )
|
Reiko Murao1), Michiyo Genba2), Kazumasa Sugiyama1) and Wei Sun3)
|
|
Structural Analysis of Pd-Cu-Si Metallic Glassy Alloy Thin Films with Varying Glass Transition Temperature
|
(
pp.1349 - 1355 )
|
Susumu Kajita1), Shinji Kohara2), Yohei Onodera3), Toshiharu Fukunaga3) and Eiichiro Matsubara4)
|
|
Effect of Pre-Deformation on Mechanical Response of an Artificially Aged Al-Mg-Si Alloy
|
(
pp.1356 - 1362 )
|
Michal Kolar1), Ketill Olav Pedersen2), Sverre Gulbrandsen-Dahl1)3), Katharina Teichmann1) and Knut Marthinsen1)
|
|
Effects of T5 Treatment on the Microstructure and Mechanical Properties of Mg-8Al-2Li Alloy
|
(
pp.1363 - 1368 )
|
P. C. Wang1), H. C. Lin1), K. M. Lin2), M. C. Lin1), M. T. Yeh3) and C. Y. Lin4)
|
|
First-Principles Study on Enhanced Grain Boundary Embrittlement of Iron by Phosphorus Segregation
|
(
pp.1369 - 1373 )
|
Motohiro Yuasa1) and Mamoru Mabuchi1)
|
|
Nanoindentation Behaviour and Annealed Microstructural Evolution of Ni/Si Thin Film
|
(
pp.1374 - 1380 )
|
Woei-Shyan Lee1), Tao-Hsing Chen2), Chi-Feng Lin3) and Jyun-Ming Chen1)
|
|
Low-Temperature Creep at Ultra-Low Strain Rates in Pure Aluminum Studied by a Helicoid Spring Specimen Technique
|
(
pp.1381 - 1387 )
|
Junjie Shen1), Shigeto Yamasaki1), Ken-ichi Ikeda2), Satoshi Hata2) and Hideharu Nakashima2)
|
|
Investigation of the Resistance to Localized Corrosion Associated with Microstructure of Tube-to-Tube Sheet Welds of UNS S32050 Super Austenitic Stainless Steel for Seawater Cooled Condenser
|
(
pp.1388 - 1395 )
|
Seong-Yoon Kim1), Soon-Tae Kim1), In-Sung Lee1), Yong-Soo Park1), Min-Chul Shin2) and Young-Sub Kim3)
|
|
Size-Controlled Hydrothermal Synthesis of Bismuth Sodium and Bismuth Potassium Titanates Fine Particles and Application to Lead-Free Piezoelectric Ceramics
|
(
pp.1396 - 1401 )
|
Kiyoshi Kanie1), Yoshiki Numamoto1)2), Shintaro Tsukamoto2), Takafumi Sasaki1), Masafumi Nakaya1), Junji Tani1), Hirofumi Takahashi2) and Atsushi Muramatsu1)
|
|
Dissolved-Oxygen-Induced Intensive Pitting Corrosion of Amorphous ZrCu Alloys in Thin NaCl Solutions
|
(
pp.1402 - 1409 )
|
Hisanori Tanimoto1), Yosuke Soga1), Yoshinobu Takayanagi1) and Hiroshi Mizubayashi1)
|
|
Surface Characteristics of Titanium Oxide Films Prepared by Micro-Arc Oxidation: Comparison of Direct Current Electrolysis and Pulse Electrolysis
|
(
pp.1410 - 1417 )
|
M. Iwasaki1)2), K. Shimada1), K. Kudo1), Y. Tamagawa1) and H. Horikawa2)
|
|
Microstructure and Joint Strength of Friction Stir Spot Welded 6022 Aluminum Alloy Sheets and Plated Steel Sheets
|
(
pp.1418 - 1425 )
|
Keyan Feng1), Mitsuhiro Watanabe2) and Shinji Kumai1)
|
|
Effect of Chromium Precipitation on Machinability of Sintered Brass Alloys Dispersed with Graphite Particles
|
(
pp.1426 - 1430 )
|
Hisashi Imai1), Shufeng Li1), Katsuyoshi Kondoh1), Yoshiharu Kosaka2), Akimichi Kojima2), Haruhiko Atsumi1) and Junko Umeda1)
|
|
Enhanced Mechanical Properties of LaF3 Thin Films by Ion Plating Deposition
|
(
pp.1431 - 1435 )
|
Takanobu Hori1)2), Shinji Motokoshi3) and Hiroshi Kajiyama2)
|
|
Comparative Study of Microstructures and Material Properties in the Vacuum and Spark Plasma Sintered Ti-Calcium Phosphate Composites
|
(
pp.1436 - 1442 )
|
Dibakar Mondal1), Swapan Kumar Sarkar1), Ik-Hyun Oh2) and Byong-Taek Lee1)
|
|
Formation Process of [B12H12]2− from [BH4]− during the Dehydrogenation Reaction of Mg(BH4)2
|
(
pp.1443 - 1446 )
|
Yigang Yan1), Hai-Wen Li1), Hideki Maekawa2), Masakazu Aoki3), Tatsuo Noritake3), Mitsuru Matsumoto3), Kazutoshi Miwa3), Shin-ichi Towata3) and Shin-ichi Orimo1)
|
|
Microstructure Development in Neutron Irradiated Tungsten Alloys
|
(
pp.1447 - 1451 )
|
Takashi Tanno1), Makoto Fukuda1), Shuhei Nogami1) and Akira Hasegawa1)
|
|
A Novel Photoactive Nano-Filtration Module Composed of a TiO2 Loaded PVA Nano-Fibrous Membrane on Sponge Al2O3 Scaffolds and Al2O3-(m-ZrO2)/t-ZrO2 Composites
|
(
pp.1452 - 1456 )
|
Nguyen Thuy Ba Linh1), Kap-Ho Lee2) and Byong-Taek Lee1)
|
|
Fabrication of TiB2–FeAl Cermet by Mechanical Milling and Subsequent Pulsed Current Sintering
|
(
pp.1457 - 1461 )
|
Hiroyuki Nakayama1), Shuji Tada1), Kimihiro Ozaki1) and Keizo Kobayashi1)
|
|
Recovery and Concentration of Precious Metals from Strong Acidic Wastewater
|
(
pp.1462 - 1470 )
|
Hisayoshi Umeda1)2), Atsushi Sasaki2), Kunihiko Takahashi2), Kazutoshi Haga1), Yasushi Takasaki3) and Atsushi Shibayama1)
|
|
Fundamental Study on Recovery of WC from Hardmetal Sludge by Using Mineral Processing
|
(
pp.1471 - 1476 )
|
Jung-Ah Kim1), Gjergj Dodbiba1), Katsunori Okaya1), Seiji Matsuo1), Kenji Nishimura2) and Toyohisa Fujita1)
|
|
Effects of Ca on Tensile Properties and Stretch Formability at Room Temperature in Mg-Zn and Mg-Al Alloys
|
(
pp.1477 - 1482 )
|
Yasumasa Chino1), Takamichi Ueda2), Yuki Otomatsu2), Kensuke Sassa1), Xinsheng Huang1), Kazutaka Suzuki1) and Mamoru Mabuchi2)
|
|
Effect of CaO Addition on the Ignition Resistance of Mg-Al Alloys
|
(
pp.1483 - 1488 )
|
Jin-Kyu Lee1) and Shae K. Kim1)
|
|
Instantaneous and Complete Decomposition of Formaldehyde by Thermally Activated Oxide Semiconductors
|
(
pp.1489 - 1491 )
|
Hideki Shima1), Hiroo Takahashi1), Hiroyuki Miyauchi2) and Jin Mizuguchi1)
|
|
Thermal Boundary Resistance Effect on Non-Equilibrium Energy Transport in Metal-Dielectric Thin Films Heated by Femtosecond Pulse Lasers
|
(
pp.1492 - 1499 )
|
Jae Bin Lee1) and Seong Hyuk Lee1)
|
|
Microstructural Characterizations Following Friction Stir Welding of Dissimilar Alloys of Low- and High-Carbon Steels
|
(
pp.1500 - 1505 )
|
Don Hyun Choi1), Byung Wook Ahn1), Yun Mo Yeon2), Seung Hwan C. Park3), Yutaka S. Sato4), Hiroyuki Kokawa4) and Seung Boo Jung1)
|
|
Numerical and Experimental Investigation into Effect of Temperature Field on Sensitization of AISI 304 in Butt Welds Fabricated by Gas Tungsten Arc Welding
|
(
pp.1506 - 1514 )
|
Hwa Teng Lee1) and Chun Te Chen1)
|
|
Flattening Characteristics of Ni20Cr Thermal-Sprayed Coating Layers on Preheated SCM415 Substrates
|
(
pp.1515 - 1521 )
|
Dong Hwan Shin1), Jae Bin Lee1), Jae Lyoung Wi2), Seungil Park1), Namil Kim1), Minhaeng Cho1), Jong Min Kim1) and Seong Hyuk Lee1)
|
|
Indium Addition on Intermetallic Compound Evolution in Tin-Silver Solder Bump
|
(
pp.1522 - 1524 )
|
Dongliang Wang1)2), Yuan Yuan1) and Le Luo1)
|
|