PREFACE
|
(
p.1539 )
|
Masaki Tanaka1), Naoya Kamikawa2), Nobuhiro Tsuji3)
|
|
Application of High-Pressure Torsion to WC–Co Ceramic-Based Composites for Improvement of Consolidation, Microstructure and Hardness
|
(
pp.1540 - 1548 )
|
Kaveh Edalati1) 2), Hideaki Iwaoka1) 2), Shoichi Toh3), Ken Sasaki4), Zenji Horita1) 2)
|
|
Obtaining Copper with Harmonic Structure for the Optimal Balance of Structure-Performance Relationship
|
(
pp.1549 - 1553 )
|
Dmitry Orlov1), Hiroshi Fujiwara2), Kei Ameyama3)
|
|
Grain Refinement of As-Cast Pure Al by Cold-Rolled Al–Ti Alloy Refiner
|
(
pp.1554 - 1561 )
|
Hisashi Sato1), Kentaro Ota1), Motoo Furukawa1), Miki Azuma1), Yoshimi Watanabe1), Zuogui Zhang2), Kaneaki Tsuzaki2) 3)
|
|
Bulky Averaged Microscopic Information for ECAP-Processed Cu Using Accelerator-Based Gamma-Ray-Induced Positron Annihilation Spectroscopy and Neutron Diffraction
|
(
pp.1562 - 1569 )
|
Toshihiro Ishibashi1), Yo Tomota1), Satoshi Sugaya1), Hiroyuki Toyokawa2), Tetsuya Hirade3), Zenji Horita4) 5), Hiroshi Suzuki6)
|
|
Microstructures of Pearlite and Martensite Transformed from Ultrafine-Grained Austenite Fabricated through Cyclic Heat Treatment in Medium Carbon Steels
|
(
pp.1570 - 1574 )
|
Akinobu Shibata1), Shohei Daido1), Daisuke Terada1), Nobuhiro Tsuji1)
|
|
Molecular Dynamics Study on Amorphization of TiNi by Severe Plastic Deformation
|
(
pp.1575 - 1579 )
|
Masato Shimono1), Koichi Tsuchiya1), Hidehiro Onodera1)
|
|
Influence of Competition between Intragranular Dislocation Nucleation and Intergranular Slip Transfer on Mechanical Properties of Ultrafine-Grained Metals
|
(
pp.1580 - 1586 )
|
Tomohito Tsuru1), Yoshiteru Aoyagi2), Yoshiyuki Kaji1), Tomotsugu Shimokawa3)
|
|
Comparative Analysis of Two Twist-Based SPD Processes: Elliptical Cross-Section Spiral Equal-Channel Extrusion vs. Twist Extrusion
|
(
pp.1587 - 1591 )
|
Marat I. Latypov1), Yan Beygelzimer2), Hyoung Seop Kim1) 3)
|
|
Atomistic Design of High Strength Crystalline-Amorphous Nanocomposites
|
(
pp.1592 - 1596 )
|
Shin Yamamoto1), Yun-Jiang Wang2), Akio Ishii1), Shigenobu Ogata1) 2)
|
|
First-Principles Calculation of Grain Boundary Excess Volume and Free Volume in Nanocrystalline and Ultrafine-Grained Aluminum
|
(
pp.1597 - 1604 )
|
Tokuteru Uesugi1), Kenji Higashi1)
|
|
Grain Size Variation during Low Temperature Creep and Tensile Deformation of Ultrafine-Grained Copper
|
(
pp.1605 - 1611 )
|
Satoshi Okubo1), Yoji Miyajima1), Toshiyuki Fujii2), Susumu Onaka1), Masaharu Kato1)
|
|
Cyclic Response of SUS316L Stainless Steel Processed by ECAP
|
(
pp.1612 - 1618 )
|
Yoshihisa Kaneko1), Shingo Hayashi1), Alexei Vinogradov1)
|
|
Mechanical Properties of Harmonic Structured Composite with Pure Titanium and Ti–48 at%Al Alloy by MM/SPS Process
|
(
pp.1619 - 1623 )
|
Hiroshi Fujiwara1), Takeshi Kawabata2), Hiroyuki Miyamoto1), Kei Ameyama3)
|
|
Enhancement of Low Temperature Toughness in Bulk Nanostructured Metals
|
(
pp.1624 - 1628 )
|
Masaki Tanaka1), Shunsaku Takano1), Kenji Higashida1)
|
|
Harmonic Structure Design of a SUS329J1 Two Phase Stainless Steel and Its Mechanical Properties
|
(
pp.1629 - 1633 )
|
Octav Paul Ciuca1), Mie Ota1), Shan Deng2), Kei Ameyama3)
|
|
Cross-Sectional Distributions of Mechanical Properties of Fine Cu–Sn Alloy Wire Manufactured by Continuous Rotary Draw Bending
|
(
pp.1634 - 1641 )
|
Junichiro Tokutomi1), Kenichi Hanazaki1), Nobuhiro Tsuji2), Jun Yanagimoto3)
|
|
Effects of High-Pressure Torsion on the Pitting Corrosion Resistance of Aluminum–Iron Alloys
|
(
pp.1642 - 1649 )
|
Hiroaki Nakano1), Hiroto Yamaguchi2), Yohei Yamada2), Satoshi Oue1), In-Joon Son3), Zenji Horita1), Hiroki Koga4)
|
|
Anisotropy of Electrical Resistivity in Cold Rolled Ti Sheet
|
(
pp.1650 - 1654 )
|
Masato Ueda1), Kei Ota1), Masahiko Ikeda1)
|
|
Temperature Dependency of Schottky Barrier Parameters of Ti Schottky Contacts to Si-on-Insulator
|
(
pp.1655 - 1660 )
|
I. Jyothi1), Hyun-Deok Yang1), Kyu-Hwan Shim1), V. Janardhanam2), Seung-Min Kang3), Hyobong Hong4), Chel-Jong Choi1) 2)
|
|
The Barkhausen Effects and Nano-System Magnetizations in Fe
|
(
pp.1661 - 1666 )
|
Shuji Obata1)
|
|
Full-Potential KKR Calculations for Point Defect Energies in Fe-Based Dilute Alloys, Based on the Generalized-Gradient Approximation
|
(
pp.1667 - 1672 )
|
Chang Liu1), M. Asato2), N. Fujima1), T. Hoshino1)
|
|
Magnetic Properties of MnBi Fine Particles Fabricated Using Hydrogen Plasma Metal Reaction
|
(
pp.1673 - 1677 )
|
Keita Isogai1), Masashi Matsuura1), Nobuki Tezuka1), Satoshi Sugimoto1)
|
|
Evaluation of Porosity and Its Variation in Porous Materials Using Microfocus X-ray Computed Tomography Considering the Partial Volume Effect
|
(
pp.1678 - 1685 )
|
Masaji Kato1), Manabu Takahashi2), Satoru Kawasaki1), Toshifumi Mukunoki3), Katsuhiko Kaneko1)
|
|
Synthesis of Novel Pd/γ-AlOOH Composites and Its Electrooxidation toward Methanol in Alkaline Solution
|
(
pp.1686 - 1690 )
|
Hongwei Hou1), You Zhu2), Qingyuan Hu1)
|
|
Effects of P Addition on Corrosion Properties of Soft Magnetic FeSiB Alloys
|
(
pp.1691 - 1696 )
|
Zhenhua Dan1), Akihiro Makino1), Nobuyoshi Hara2)
|
|
Application of Finite Element Method to Analysis of Ductile Fracture Criteria for Punched Cutting Surfaces
|
(
pp.1697 - 1702 )
|
Toru Tanaka1), Seiya Hagihara2), Yuichi Tadano2), Takuma Inada2), Takanobu Mori3), Kenji Fuchiwaki4)
|
|
Effects of Forming Conditions of Roll Offset Method on Sectional Shape at the Corner of Square Steel Pipe
|
(
pp.1703 - 1708 )
|
Takuo Nagamachi1), Takefumi Nakako2), Daisuke Nakamura2)
|
|
Characterizations of Temperature-Dependent Tensile Deformation and Fracture Features of Commercially Pure Titanium
|
(
pp.1709 - 1714 )
|
Jong-Guk Yun1), Ying Yan1), Feng-Wu Long1), Xiao-Wu Li1) 2)
|
|
Electron Microscopy Study of Preferential Variant Selection in CoPt Alloy Ordered under a Magnetic Field
|
(
pp.1715 - 1718 )
|
Hiroshi Akamine1), Sahar Farjami2), Masatoshi Mitsuhara2), Minoru Nishida2), Takashi Fukuda3), Tomoyuki Kakeshita3)
|
|
Improvement of Fatigue Strength of Ti–6Al–4V Alloy by Hybrid Surface Treatment Composed of Plasma Nitriding and Fine-Particle Bombarding
|
(
pp.1719 - 1724 )
|
Tatsuro Morita1), Noriaki Uehigashi2), Chuji Kagaya3)
|
|
Experimental Observations and Numerical Modeling of a Single Coarse Lignite Particle Dried in Superheated Steam
|
(
pp.1725 - 1734 )
|
Tsuyoshi Kiriyama1), Hideaki Sasaki1), Akira Hashimoto1), Shozo Kaneko1), Masafumi Maeda1)
|
|
Platinum-Enriched Ni/Pt(111) Surfaces Prepared by Molecular Beam Epitaxy: Oxygen Reduction Reaction Activity and Stability
|
(
pp.1735 - 1740 )
|
Naoto Todoroki1), Ryota Takahashi1), Yuki Iijima1), Yoshinori Yamada1), Takehiro Hayashi1), Toshimasa Wadayama1)
|
|
Fabricating Porous Glass with Needle-Shaped Hydrate Crystals by Hydrothermal Treatment of Blast-Furnace Slag and Borosilicate Glass Mixture
|
(
pp.1741 - 1749 )
|
Masanori Suzuki1), Toshifumi Yamamoto1), Soichiro Kuwata1), Bora Derin2), Nakamichi Yamasaki1), Toshihiro Tanaka1)
|
|
Separation of Mo from Chloride Leach Liquors of Petroleum Refining Catalysts by Ion Exchange
|
(
pp.1750 - 1754 )
|
Thi Hong Nguyen1), Seong Ho Sohn2), Man Seung Lee1)
|
|
Microstructure of Fe–TiC Composite Surface Layer on Carbon Steel Formed by Laser Alloying Process
|
(
pp.1755 - 1759 )
|
Takuto Yamaguchi1), Hideki Hagino1), Mamoru Takemura1), Yasunori Hasegawa1), Yasuhiro Michiyama1), Atsushi Nakahira2)
|
|
Thermal Stability of BNCT Neutron Production Target Synthesized by In-Situ Lithium Deposition and Ion Implantation
|
(
pp.1760 - 1764 )
|
Shintaro Ishiyama1), Yuji Baba1), Ryo Fujii2), Masaru Nakamura2), Yoshio Imahori2)
|
|
Direct Synthesis of Li3N Thin Layer on Lithium Target Surface for BNCT in N2 Gaseous Conditions
|
(
pp.1765 - 1769 )
|
Shintaro Ishiyama1), Yuji Baba1), Ryo Fujii2), Masaru Nakamura2), Yoshio Imahori2)
|
|
Alloying Effect of Chromium on the Corrosion Behavior of Low-Alloy Steels
|
(
pp.1770 - 1778 )
|
S. A. Park1), D. P. Le1), J. G. Kim1)
|
|
Effect of Pickling Treatment on the Pitting Corrosion of Hyper Duplex Stainless Steel in a Highly Concentrated Chloride Solution
|
(
pp.1779 - 1787 )
|
Min-Seok Choi1), Soon-Tae Kim1), Soon-Hyeok Jeon1), Yong-Soo Park1), Kwang-Tae Kim2), Ji-Soo Kim2), Ki-won Park3), Chang-Man Kim4)
|
|
Effects of Injection Conditions in the Semi-Solid Injection Process on the Fluidity of JIS AC4CH Aluminum Alloy
|
(
pp.1788 - 1794 )
|
Yuichiro Murakami1), Kenji Miwa2), Masayuki Kito3), Takashi Honda3), Naoyuki Kanetake4), Shuji Tada1)
|
|
Creation of Adhesive Force between Laminated Sheets of Aluminum and Polyurethane by Homogeneous Low Energy Electron Beam Irradiation Prior to Hot-Press
|
(
pp.1795 - 1799 )
|
Masae Kanda1), Yusuke Miyazawa2), Masato Uyama2), Yoshitake Nishi1) 2)
|
|
Effect of Applied Voltage on the Microstructure and Bioactivity of MAO Film on Ti Substrate
|
(
pp.1800 - 1804 )
|
Ma Fengcang1), Liu Ping1), Li Wei1), Liu Xinkuan1), Chen Xiaohong1), He Daihua1), Wang Liqiang2), Geng Fang3)
|
|
Low Temperature Thermal Evaporation Process for the Synthesis of ZnO Nanowires
|
(
pp.1805 - 1808 )
|
Geun-Hyoung Lee1)
|
|
Characteristic Sorption of H3BO3/B(OH)4− on Magnesium Oxide
|
(
pp.1809 - 1817 )
|
Keiko Sasaki1), Xinhong Qiu1), Sayo Moriyama1), Chiharu Tokoro2), Keiko Ideta3), Jin Miyawaki3)
|
|
Thermoelectric Properties of Perovskite-Type Oxide Ca–Mn–O System in Relation to A-Site Vacancies
|
(
pp.1818 - 1822 )
|
Hiroshi Kawakami1), Miwa Saito2), Hironao Takemoto2), Hiroshi Yamamura2), Yukihiro Isoda1), Yoshikazu Shinohara1)
|
|
Differential Scanning Calorimetry of the α/γ Transformation in Fe–Co Alloys under a Magnetic Field
|
(
pp.1823 - 1828 )
|
Wataru Maruno1), Yasuhiro Morizono1), Sadahiro Tsurekawa1)
|
|
Phase Stability of Iron Oxides on Palladium–Iron Alloy at Elevated Temperatures and Its Application to High Temperature Oxidation
|
(
pp.1829 - 1837 )
|
Tedi Kurniawan1), Mitsutoshi Ueda1), Kenichi Kawamura1), Toshio Maruyama1)
|
|
Formation of Fine Multicomponent Precipitates and Enhanced Precipitation-Hardening in an Al–Cr–Pr–Zr Alloy
|
(
pp.1838 - 1843 )
|
Lanping Huang1), Kanghua Chen1), Song Li1)
|
|
Effect of Minor Alloying Substitution on Glass-Forming Ability and Crystallization Behavior of a Ni57Zr22X8Nb8Al5 (X = Ti, Cu) Alloy Synthesized by Mechanical Alloying
|
(
pp.1844 - 1850 )
|
Chao Yang1), Jin Zeng1), Hao Guo1), ShengGuan Qu1), XiaoQiang Li1)
|
|
Account
Main menu
Search
